20 Most Recent Kenwood KDC-MP2032 CD Player Questions & Answers

go to dealer with vehicle or vin and proof of ownership for code most dealers give code for free but most will charge you if you have them enter code

my stereo kenwood kdc-mp2032 is in protect mode, í lost my manual, and i don´t know how quit this mode. can yuo help me?

You may download a copy of the manual from here. The clock instructions are on page 21.

It's the button marked with the up-pointing triangle, above and right of the control knob on the right side of the receiver. See the illustration on page 14 of the manual.

You might try disconnecting the memory wire and doing the reset again. If your head unit is not where u can access the wiring harness, you can disconnect the battery. This should clear any settings you have in the radio. Of course it will require resetting the clock, stations, etc...

I believe the auxillery is for output only. youll have to get an am/fm transmitter instead .

Can you switch to aux even when nothings plugged in??

Best Reguards, Premium FixYa Support

Try to check first the fuse on the fuse box of your boat if it is still good then the fuse of your stereo is located at the back of the stereo itself. Detached the stereo from its housing or holder you will see the fuse at the back of it.

Did you check to see if the batteries are good in the remotes?