20 Most Recent Zapco Reference 750 Car Audio Amplifier - Page 7 Questions & Answers

Look at the wire and look at the contacts where the wires got torn away. Normally there is some type of clue to where they came from. In general terms red or brown is live and black or blue is negative, green is ground. The seller gives Lifetime Tech Support. They can check for you. https://www.onlinecarstereo.com/CarAudio/p_44441_Performance_Teknique_ICBM-BT110X.aspx https://www.google.com/search?q=performance+teknique+icbm+bt110x+wiring+diagram ..

If your 6-disc CD changer in the trunk of your 2002 Mercedes CLK430 was working fine yesterday, but is now displaying a "No CD Changer" message, there may be a few things you can try to troubleshoot the issue: 1. Check the connections: Make sure the CD changer is properly connected to the car's audio system. Check the connections for any loose or disconnected cables. Also, check the fuse for the CD changer in the car's fuse box. 2. Check for jammed CDs: It is possible that one of the CDs in the changer is jammed, which can cause the error message to appear. Try pressing the eject button to see if any CDs are stuck in the changer. If so, try gently removing them. 3. Check the CD format: Make sure the CDs you are trying to play are in a format that is compatible with the CD changer. The CD changer may not be able to play CDs that are scratched or in a non-standard format. 4. Try resetting the audio system: Try resetting the audio system by disconnecting the car battery for a few minutes. This may reset the CD changer and fix any software issues. If none of these solutions work, there may be a hardware issue with the CD changer. It may need to be repaired or replaced. You can consult a mechanic or audio specialist for further assistance.

I have just purchased a Toyota Vitz Car imported from Japna into Sri Lanka. It has a panasonic cn-mw 250d radio/CD type system in it but due to missing sd card with appropriate software I am not able to use it. can you please help. My Email [email protected]

Question edited for clarity. This is the Unit? https://www.amazon.com/Life-Gear-LGTF38-Flashlight-Weatherband/dp/B000XOO01S/ref=cm_cr_arp_d_product_top?ie=UTF8 It says it has rechargeable battery and can also be run on the mains and also AA batteries. The rechargeable batteries will be Nickel Metal Hydride and charged up by the crank.. The reviews are very mixed! https://www.amazon.com/Life-Gear-LGTF38-Flashlight-Weatherband/product-reviews/B000XOO01S There are no resources on replacing the battery apart from saying 'Do not try to remove or replace the batteries'! https://www.google.com/search?q=life+gear+LGTF38+battery+replacement The Reviews on Amazon give some clues, but not a lot. My advice is Send it BACK! 5. It includes the rechargeable battery in the package, and it will also run off of regular batteries. The hand crank can be used to charge the rechargeable battery or you can charge from a wall plug, also included. ..

If you mean the FM station for a bluetooth connection, its ususally 88.2 to 95. It will depend on the bluetooth unit you have. Try stations from 88.0 to 95 in increments of one until you get the clearest reception.

Question edited for a lot more clarity. Here is the manual. This is an aftermarket unit unit so there will be an inline fuse on the power wire This one is a good diagram and shows 10 amp fuse on the yellow wire to the battery. Make sure it is connected there at the battery, but the installer may have just spliced into a live feed up behind it.. https://www.manualslib.com/manual/40984/Dual-Xdvd8181.html?page=5#manual

If your car audio system requires a code to unlock it, there are a few options you can try: Check the user manual: The user manual for your car audio system may contain information on how to unlock it if a code is required. Look for a section on "security" or "anti-theft" features. Contact the manufacturer: If you don't have the user manual or can't find the information you need, you can try contacting the manufacturer of the car audio system. They may be able to provide you with the code or instructions on how to unlock it. Try common codes: Some car audio systems use a default code, such as 0000 or 1234. Try entering these codes to see if they work. Reset the system: If none of the above options work, you may need to reset the car audio system. This will erase any saved settings and data, including the code. The process for resetting the system will vary depending on the make and model of your car and audio system. Check the user manual or contact the manufacturer for instructions.

For Clarion radio codes contact this link with all the serial numbers from the radio and they will generate the code for you quickly and cheaply: https://www.vivastreet.co.uk/car-parts/hayes-ub4/car-audio-security-code/311088168

dealer with vin and proof of ownership

Remove the flame spreader and put it in a pan of cold water with a teaspoon of washing up liquid. Bring it slowly to a simmer. Be careful because it will want to boil over. Turn off the gas and leave it to cool. Use a plastic pot brush to clean and push the bristles down the holes in the flame spreader. Rinse and put it back, making sure it is seated properly. Most have a notch they must drop into.

Question edited to tidy up the written English. This looks link it might be a winch, but you posted to Car Audio! https://www.google.com/search?q=liebmaya+wireless+winch+remote+wiring+diagram ..

The Proton D940 stereo receiver features both analog and digital inputs, so you have a few options when it comes to connecting a CD player to the receiver. For a digital connection, you will need a CD player with a digital output, such as a coaxial or optical output, and a digital cable to connect the two. Look for a CD player with a digital output labeled "coaxial" or "optical" and purchase a cable that matches the output on the CD player and the input on the receiver. For an analog connection, you will need a CD player with analog outputs, such as RCA outputs, and an RCA cable to connect the two. Look for a CD player with an analog output labeled "RCA" and purchase an RCA cable with the appropriate connectors to match the CD player and the receiver. Once you have the CD player and cables, connect the CD player to the Proton D940 stereo receiver using the appropriate input on the back of the receiver. If you are using a digital connection, select the appropriate digital input on the receiver using the input selector button on the front of the receiver. If you are using an analog connection, select the appropriate analog input using the same input selector button.

Question edited for clarity. Normally you need a harness if it is going in a different vehicle. Crutchfields sell them https://www.google.com/search?q=Toyota+nhdn-w56+wiring+diagram ..

What is the HLI port on the MTX tna251 amplifier?

You can try to hold the right round selector knob to the right for 10 seconds while unit is on asking for code input. That will work to unlock if the previous owner did not set the 4 digit code. Good Luck

Question edited for clarity. Try Reset. If that doesn't work, find a Pioneer Service Centre. https://www.google.com/search?q=Carrozzeria+AVIC-HRZ08+buttons+not+functioning ..

This is an old question but I recently had the same problem. The owners manual says to press and hold the band and preset 1 buttons simultaneously. This did not work for me. I removed the radio from the dash and pulled the fuse on the back of the radio. Replacing it after a few seconds reset the radio.