20 Most Recent
Questions & Answers
Why does my sub and amp go into protected mode
Devices go in protect mode when a fault condition is detected. These include insufficien voltage, excessive load, shorts and contact, overheating.
In your case the problem is usually excessive power draw. A contact in wiring can also cause the problem, but this is far less common.
Use a capacitor fix the excessive power draw from the amp and sub.
See:Capacitors - BOSS AUDIO SYSTEMS
No Power to the Amp
open the amp and look for a fuse either on a circuit board or on wires inside. trace power wires onto board.
How do yu reset amp
I dont lnow what "just quit blew fuse getting power" means. But there is not reset on that amp.
Not finding what you are looking for?