20 Most Recent
GE WSM2480DWW Unitized Spacemaker Washer and Gas Dryer - Page 9 Questions & Answers
GE top load washer
GTW680BSJ5WS
Need help with H2O Supply error message
Washer won't run. Display says "H2O Supply" and sounds like it's trying to pump out; water is on, household water supply is good. ... With good water pressure then you have a faulty circuit board that needs replaced.
https://www.justanswer.com/appliance/8m26u-ge-gtwn7450d0ww-top-load-washer-display-says-h2o-supply.html
H2O supply and Tub will not fill in Ge Washer
First make sure someone didn't turn off the supply valves where the washer hoses are attached to. If both are on, then try to fill machine and switch between hot and cold water. If one of the 2 temps works, the other half of the fill valve is bad. The fill valve is the part where the hoses attach to the back of the machine. It is a 2 part electric valve with 2 electric coils on the valve. Could be one coil is bad or possibly the filter screen is blocked on one side. Screens can be checked and looked at by removing hoses and looking inside end of valve. If coil is bad, complete valve needs replaced. Easy exchange, a few screws, 4 wires, and a small hose leading to inside of machine.
Not finding what you are looking for?