Sharp AR-5316 Advanced Digital Imager Copier - Page 5 - Answered Questions & Fixed issues
Error code H/4
enter service code # interurpt c interupt , machine goes off then enter 14 then press print button. this will cancel error code H4.
on Mar 11, 2014
F2 04 Content Improper cartridge (Destination error, life cycle
Detail The destination of the machine differs from that
of the CRUM.
The life cycle information is other than "Not
Cause CRUM chip defect
Improper developing unit
Replace the CRUM chip.
Replace the developing unit.
The trade mark code of the CRUM differs.
The company code of the CRUM differs.
The boot program model code does not
coincide with the CRUM model code.
Type error When the CRUM type is other than genuine/
The machine destination differs from the
When an error value is included in the initial
check information. When the max. toner supply
time is 00.
When the print hard stop is 00.
Misc error When the Misc information is other than "Not
on Feb 13, 2014
H5-01 is caused by multiple jams at the exit. Try resetting via pressing clear, interupt, 0, interupt,14,1 start button.
on Jan 23, 2014
Afficharge u2-40 ar m276
I am guessing that you may have just replaced your toner cartridge. Remove the cartridge, switch the machine off and with the toner cartridge still out of the machine close the copiers front cover and turn the machine back on. This will reset the code and the machine should now ask you for the toner cartridge again. First of all give the cartridge a good shake and then refit it to the copier as normal. Hopefully your done, if not you may need to replace the cartridge and get a refund from your supplier as it may be faulty.
Follow me on Twitter @CDOS_Service
on Jan 19, 2014
2h flashing on screen,won't print
heat roller problem , enter # ,interupt, c , interupt machine goes off and enter 14 then press print buttom. this might clear ur problem. if it repeat same h2 code. need to change thermister and enter above code 14 again
on Jan 08, 2014
Not finding what you are looking for?