Top 20 Westell Wirespeed VersaLink (A99-327W11-00) Router (A99327W1100) Questions & Answers

0helpful
1answer

I am having trouble with Port Forwarding for the Westell 327W Wireless Router.

Hello Michael Yancy, Seems to be a bit dated... but the AMATEURS that have these ... like them. Those trying to set them up... Not-so-much see the videos at: How to set up your Echolink Port Configuration Port Forwarding For Noobs Linksys Routers eHAM.net has the best forum (important) http://www.eham.net/ehamforum/smf/index.php?topic=76200.5;wap2
5/20/2017 5:30:05 AM • Westell... • 200 views • 0 helpful votes
0helpful
1answer

Why am losing internet connection every other day for couple minutes or less

Most likely bad connections. Tighten all cable connections.
6/9/2014 7:52:12 PM • Westell... • 69 views • 0 helpful votes
0helpful
1answer

Lost password of working wi-fi conneciton

Will likely have to reset you router and set it up again. Check you manual on how to do this.
12/29/2013 10:27:24 PM • Westell... • 123 views • 0 helpful votes
0helpful
1answer

I have 2wire 393 connection. After shutting down wireless light keeps flashing, it's never done this before.

Pull the AC plug out for a 30 seconds or so and plug back in.
12/15/2012 4:07:18 PM • Westell... • 36 views • 0 helpful votes
0helpful
1answer

I have a westell 7500 router from centurylink and im trying access the settings but i cant find the default gateway, ive tried typing ipconfig on cmd but no address comes up

Try typing either 192.168.0.1 or 192.16.1.1 in the address bar of your web browser.
5/19/2012 3:28:48 PM • Westell... • 196 views • 0 helpful votes
0helpful
1answer

Can't connect my 2nd Nook Tablet

Since the nook is wireless, I don't understand what the problem is. Doesn't your nook make a wireless connection? Does it recognize any of the other wireless signals in your area? If it doesn't recognize any wireless signals, then the problem is in your nook and not from your router. Try going by a Barnes and Nobel book store and see if it will log onto theirs. And most Barnes and Nobles have people trained on Nook troubleshooting.
2/1/2012 3:51:15 PM • Westell... • 468 views • 0 helpful votes
0helpful
1answer

Need password for westell versalink ADSL2

Check on the bottom of the router and locate where the MAC ID is and try that.
3/22/2012 2:33:56 AM • Westell... • 106 views • 0 helpful votes
0helpful
1answer

All lights on router lit up except usb do have internet connection should i be concerned that this one light is not on

No... assuming you are using an ethernet connection. The USB light is only for when you are connecting via a USB cable.
3/18/2012 1:47:06 AM • Westell... • 106 views • 0 helpful votes
0helpful
1answer

Need to hard reset westell 7500 modem to factory

  • Note: Resetting your router to the factory defaults not only changes your router user name and password to the factory default values, but it also deletes all your home network settings. This includes the SSID and network encryption key. After you reset your router to the factory defaults, your home network won't be accessible until you reconfigure your router and all your network devices to use the same SSID and encryption key.
To reset your VersaLink 7500 gateway to the factory settings:
  1. Hold the reset button on the back panel of the VersaLink 7500 gateway for 30 seconds.
    • All your settings will be lost including network encryption information and any SSID information you have entered.
    • The gateway user name and password will revert to the default of Admin as the user name and Password as the password.
    versalink7500reset_425.gif
  2. Your VersaLink 7500 gateway is now using the default settings for the network configuration. This includes the default SSID and network encryption key. You must re-configure your VersaLink gateway to match your previous settings that were assigned to all other devices on your wireless network. Otherwise, no other network devices will be recognized.
12_28_2011_3_09_06_pm.gif
11/5/2011 6:48:33 PM • Westell... • 1,653 views • 0 helpful votes
0helpful
1answer

Router password change

To reset your VersaLink 327W gateway to the factory settings: Hold the reset button on the back panel of the VersaLink gateway for 30 seconds. •All your settings will be lost including network encryption information, MAC Address filtering information, and any SSID information you have entered. •The gateway user name and password will revert to the default of Admin as the user name and Password as the password. •You will need your user name or password to reconfigure the unit.. Your VersaLink 327W gateway is now using the default settings for the network configuration. This includes the default SSID and network encryption key. You must re-configure your VersaLink gateway to match your previous settings that were assigned to all other devices on your wireless network. Otherwise, no other network devices will be recognized. If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response
12/27/2011 5:57:58 PM • Westell... • 180 views • 0 helpful votes
0helpful
1answer

Need to reset password

To reset your VersaLink 327W gateway to the factory settings:Hold the reset button on the back panel of the VersaLink gateway for 30 seconds.•All your settings will be lost including network encryption information, MAC Address filtering information, and any SSID information you have entered.•The gateway user name and password will revert to the default of Admin as the user name and Password as the password.•You will need your user name or password to reconfigure the unit..Your VersaLink 327W gateway is now using the default settings for the network configuration. This includes the default SSID and network encryption key. You must re-configure your VersaLink gateway to match your previous settings that were assigned to all other devices on your wireless network. Otherwise, no other network devices will be recognized.If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response
12/4/2011 7:07:48 PM • Westell... • 138 views • 0 helpful votes
0helpful
1answer

Westell 7500 keeps kicking off my wireless on my 4g motorola atrix 2

Have you disabled the wifi sleep policy? (Settings > Wireless & networks > Wireless settings > Menu > Advanced)
11/30/2011 6:31:25 PM • Westell... • 153 views • 0 helpful votes
0helpful
1answer

I forgot my westell password i need it for another laptop because i just got another laptop and i need the password

2 OPTIONS1-RESET THE ROUTER - http://www.fixya.com/support/r11153882-general_routers_reseting2-USE A PASSWORD RECOVERY APP LIKE Download self-install executable for installing BulletsPassView with uninstall support
12/25/2011 1:12:33 PM • Westell... • 66 views • 0 helpful votes
0helpful
1answer

N router for dsl

Dozens of models ranging in price from $50 to $250. D-Link alone has six 802.11n routers
12/4/2011 2:31:45 AM • Westell... • 92 views • 1 helpful votes
0helpful
1answer

Cant find my network key

The network key should be on a sticker on the bottom of the router
12/28/2011 1:19:23 AM • Westell... • 33 views • 0 helpful votes
0helpful
1answer

Where is the wps button to connect a 327w westell

The 327w does not have a WPS button you need to configure the printer manualy
7/24/2011 7:43:12 PM • Westell... • 1,914 views • 1 helpful votes
0helpful
1answer

Did I give the wrongpassword?

Are you trying to connect wireless? Have you check if it will work via hard wired cable connection? If you want you can check for the configuration settings of your router and check if internet will work after these steps.Follow this instructions:1. connect via hard wired connection using your PC (network cable)2. open your internet explorer or any browser.3. type the numbers 192.168.1.1 on the address bar4. you will be routed to your router's settings, type admin for USERNAME: and admin for PASSWORD.5. look for the basic setup/settings6. look for the wireless settings7. under your SSID comes the WEP or WPA-PSK option8. that is your wi-fi password, then modified it and remember the password you use for you will need to enter it on your pc when you are connecting via wireless connection.you can select ASCII for password. it should be alpha numeric or combination of letters and numbers.9. select save and apply. then you are good to go.
12/28/2011 10:17:32 PM • Westell... • 30 views • 0 helpful votes
0helpful
1answer

I need the Security Key for Westell 7500

READ http://www.fixya.com/support/r7900574-general_router_setup
10/7/2011 3:43:28 PM • Westell... • 220 views • 0 helpful votes
0helpful
1answer

I have a westell 7500

JUST CONNECT THE OLD VIA LAN
9/11/2011 9:28:40 PM • Westell... • 429 views • 0 helpful votes
Not finding what you are looking for?
Westell Wirespeed VersaLink (A99-327W11-00) Router (A99327W1100) Logo

400 questions posted

Ask a Question

Usually answered in minutes!

Top Westell Wirespeed Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2278 Answers

Mehandi Husain ...

Level 3 Expert

1495 Answers

Ekse

Level 3 Expert

13435 Answers

Are you a Westell Wirespeed Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Westell Wirespeed Computers & Internet

  • Westell Wirespeed Computers & Internet

Most Popular Question

use bellsouth router windstream internet

  • Computers & Internet
Loading...