Top 20 Westell Wirespeed ProLine 6100 Router (C9961001100) Questions & Answers

If your object is to get Netflix on your TV, and not knowing what brand or model TV you have nor whether or not you have an existing wi-fi system, that question is a little difficult to answer. For example, I have Suddenlink cable, wi-fi, and can access Netflix and other similar providers through either my TV or TiVo, although I always go through TiVo. You may need to update your TV.

The title of your inquiry contains router Westell Wirespeed ProLine 6100. Your question appears to be related to a hot water heater. You may want to revise and resubmit your inquiry so that it is placed in the correct water heater section as the router section appears to be the incorrect place.

Connect what? The obvious question would be can you connect a computer via a Ethernet cable? If so, it's most likely your computer. Is the wireless secured?

f you reformatted your Windows on your pc, there's no need to change the settings of your network connections. The Westell 6100 can either be connected to your pc using the Ethernet port or the USB port if you're using the combo cable or Y-cable. It's more stable to use the Ethernet port for your Lan connection. For the USB, to reinstall the USB connection properly, you'll need the Verizon Installation CD. Make sure the USB is not connected to your PC first before you install it. You just need to follow the CD because it will tell you when to hook up the USB cable to the pc. If you still have the CD, after it runs, you have to select existing customer and then select connect new modem. After that you just to have follow the steps to install the USB connection properly and then your modem will work fine afterwards. If the problem still persists, you can try replacing the cable. If all else fails, it could be a modem problem already. You also need to check your Network Interface Card of NIC as we call it, it's built in your pc. it's the device that allows your pc to communicate with the modem. Normally after reinstalling windows, the NIC is forgotten, make sure you also install the drivers and utilities Cd for your windows.

You have to make sure that in PS3 you select Automatic Configuration under Network Settings.

In Westell 6100, you have to make sure that there is "DHCP" configured on it. You have to access it via web interface and check under IP configuration or so.

Let me know if you want the detailed process for this.

Xbox Live 360 requires you to forward the following ports: 53,80,88,1863,3074.

its your password, if you didnt set one use the serial number on the back of the router

Press Fn +F5 key then turn on wifi. Also make sure wireless switch is turned on.Then check if sitll not connected then uninstall wireless network driver from add remove programs in control panel then reinstall. Then if you are able to connect wifi then still not access internet then follow below to configure wifi router. Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then click on WAN setting and set as your internet service provider settings.Click on wireless and enable it if it is disable then save settings and restart router. Then check. . Let me know if you need further assistance. Thanks for using FixYa.

Your wireless network must be secured
You will need to check the wireless settings of the router.
Is there any computer online using the router.
check the IP address on that computer.
If yes then you can open the router set up page on that computer.
router set up page is the page where you can check all the router settings.
Click Here for more information about the routers and network

check for firewalls on both the rtrs and the modem and try to restore xbox to factory defaults on Xbox and check .

1. here is the information to get to Westell tech support
This product was specifically designed for CenturyTel. You will need to contact CenturyTel for any support issues.
Their support number is 800-809-1410.
Here is the firmware update page with other information you will need to set up your router properly,

http://www.dslreports.com/faq/6096

It means that the router has been reset, access the gui of the modem by accessing Open a browser application and enter 192.168.1.254 from there yuo can configure the modem according to your ISP settings.

No, it just a modem. It has no routing (firewall) features.

are you talking about the security key? if thats what your lloking for it should be located on a sticker on your router. or by default there shouldn't be any password on it. i suggest call your manufucturer to help you reset your router

Are one or both of you behind a router of any kind that might have a firewall feature on it blocking you from communicating with one another. It is possible that the specific port used to connect the two of you has been accidentally blocked. Try resetting security on one or both of your routers, or try connecting directly to the internet by connecting your modem to your Xbox360 directly. Doing this will show you where the problem is, if it is with the router than going directly to the modem should resolve the issue. If this does not resolve the issue than perhaps there is something wrong with your settings on the Xbox. Comment if these suggestions do not help you and we can move forward with more possible solutions.

Good Luck!

NOLA Tech

Okay, to connect to Xbox Live using Wireless Internet you will need this:

One Xbox Wireless connection unit, There are two types, the black and white versions. The black one is able to pick up the most diverse signals and has a higher potential for speed so I recommend that one.
You will also need, of course, a high speed internet source (modem) and a wireless router connected to the modem. When looking for wireless routers look for ones with marks claiming to be compatible with Xbox Live or a Windows OS. Those have been tested to work with Xbox.

Before trying to set up your Xbox Live, make sure your Router is set up with your computer, and set to be used as a wireless router. That's another tip all together but just follow your installation CD.

Okay so here we go!

First, Connect the wireless networking adapter to the back of your Xbox.
If you have a network cable plugged into your xbox, unplug it. Check to make sure the adapter's light is on.


Here's what the light's mean:
On the gray adapter:
No light: It's not getting enough power( try plugging it another USB slot)
Green light: It is connected to a wireless router, gateway or wireless access point.
Red light: It is not connected, and is ready for configuration.
Flashing red: There is a malfunction. (try again, if the problem persists return it for a replacement)

On the black adapter:
No light: It's not getting enough power( try plugging it another USB slot)
Green light: It is connected to a wireless router, gateway or wireless access point.
Flashing green: The adapter is attempting to connect to a wireless router, gateway, or access point.
Red light: It is not connected, and is ready for configuration.
Flashing red: There is a malfunction. (try again, if the problem persists return it for a replacement)

Now the CONFIGURATION, the reason most of you are reading this:

Turn your Xbox on and go to "My Xbox"
Go to "System Settings"
Go to "Network Settings"
Go to "Configure Network"
On the basic settings tab select "Wireless mode"
Select "Scan for Networks"
Select your Wireless source.

NOTE: If your Network isn't listed you will have to manually enter it.
To do this select "Specify unlisted network"
You will need to enter your SSID
Then choose which security you used to set it up on your Computer (ie: WPA, WEP...) Then enter your security code. If there is no code then select "no security"

Your adapter should have a green light now.

Now go back to "Network Settings" and select "Test Xbox Live Connection"

If it works your good to go!

If not read visit: http://support.xbox.com/support/en/us/Solutions/wizardhost.aspx?wizardid=xlcsv1

Hope this tip helps :) Tell your friends and ratings are nice. Just kidding, I just hope I helped.

That's not a question.

SO run an ethernet cord through the rooms to your router.

for this you will need to access the router set up.
Click Here for step by step solution

first go to your controle pannel then to conectivaty an run a system set upi then your computer will find the belkin insert your driver disc an run an install the ip add an security info then the belkin will reset the lights will flash for a while as it trys to connect to the net an your good to go