Top 20 i-mate JASJAR Smartphone Questions & Answers

Have you connected it to the PC before? If not then you will need to install Active Sync from Microsoft. I assume that your phone is running Windows Mo

...mda pu 10 to connect t computer hi where can i find the driver so can connect my foon"mda pu10" so ican take...

my i-mate jasjar wifi cont connected please send setting my id ([email protected])

Perform a hard reset to return it back to original state....... To perform a hard reset on a Cingular 8125, I-mate Kjam, T-mobile MDA, or other similiar device:

1. Hold down the communications manager button (top left) and the Voice activation button (top right).
2. While holding down those two buttons, use the stylus to hold in the reset button for a couple seconds.
3. Release the stylus but not the other two buttons. After a couple seconds, a black screen when come up asking you to press send to continue.
4. Release the communications manager button and the Voice activation button and press send (green phone button)

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

fanite fala........

1st SOLUTION SHOULD BE SOFTWARE IF KEYS SOUND NOT HEARED, 2nd , IF YOU CAN HEAR KEY SOUND YOU CAN ONLY CHANGE LCD AFTER CHECK LCD CONNECTOR,

i think its battery fault u can change it and try.and reset it.

http://www.devicemanuals.com/guide/Mobile%20Phone/Simoncells/I-Mate-JASJAR-Quadband-GSM-Unlocked-PDA-Smartphone-==TVRNNE9UVTM=.html

Welcome to Fixya

Try to drain the static energy of the board. Take out the battery and unplug the power adapter. Push and hold the power button for 15 secs. Put everything back in then turn on the gadget.

Thank you for using Fixya! If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

align screen

Its very simple, connect yur phone to the PC using the Usb cable connection or via BT.
Use ActiveSync & Windows Mobile Device Center

and then connect and Sync.

Its easy as that.. Enjoy.

Your device is, most probably, in bootloader mode, state in which it is starting to be fllashed with a new ROM. A simple press on the reset pin, with the stylus pen, should suffice to turn it back to life. Othewise, I'm afraid you'll have to hard reset your device. You, most probably, know that a hard reset will delete all the applications you have installed, as well as your personal data and settings. Hope you have a recent backup, to be used afterwards. Anyway, to hard reset your device, open its screen to reveal the hardware keyboard. Then, press and hold both softkeys on the keyboard (the ones marked with '-'), and, whilst keeping them pressed, briefly press the reset pin with the stylus pen. Release the softkeys when a screen asking for confirmations comes up. Confirm the procedure by pressing 0 (zero).
Hope you are able to sort your problems out.
Regards, Carlos

Go to 'Start > Settings > Connections tab > Wi-Fi > Network Adapters tab' and set the 'My network card connects to:' dropdown menu to 'The Internet'.
Hope it works for you.
Regards, Carlos

hi there,
i need the origanl rom too.i lost my rom and my fone is just showing me balck secreen and no display as i did hard reset but in vain. pls pls help me if you find any link where i cold get the rom for my jasjar.

my id is
[email protected]
thnx
raza

You have to tap the exact center of the '+' symbol with the stylus pen 5 times: on the center and on each corner of the screen. If you miss one of them, the process will be restarted.
Just my 2 cents... Carlos

Download the settings here:
http://www.tradebit.com/filedetail.php/8624007

settings will be receive through sms,, it have the option to save, it,
just open the message,, and save, it,,
if you want to save it manually,,
the call the customer care, of your netwrok provider

u have to set the configration manuaaly.........go to the settng u wll get configration setting........ask ur operator network provider to give you manual stting as general stting for orther mobile......

i'd this problem few years ago.i bought a new battery and it was fine.dun see battery level 70% as it's not precise.

I searched the web but unfortunately, I couldn't find the Active Sync software anywhere. It would be best to contact the manufacturer for the active sync software. That is the only thing that you could do and you could trust.

Good luck and have a great day ahead!