20 Most Recent Sony Bean MP3 Player - Page 3 Questions & Answers


This could be failure of the player mechanism, particularly synchronization of carousel operation.

Sony Audio... • Answered on Dec 24, 2020


You will have to disassemble the player to get access to the disc before you can remove it.

Sony Audio... • Answered on Dec 24, 2020


The digital RCA audio cable is not the same as the analog RCA audio cable. You need a digital audio (input) to analog audio (output) converter. Amazon has a number of models: https://www.amazon.com/DA-Converters/b?ie=UTF8&node=3224445011 . Many models do not come with audio cables. Thus you'll need to supply the digital coaxial audio cable (see https://www.amazon.com/AmazonBasics-Digital-Audio-Compatible-Coaxial/dp/B01D5H8TS4/ref=pd_bxgy_2/134-6585034-3648633?_encoding=UTF8&pd_rd_i=B01D5H8TS4&pd_rd_r=e311c756-6e80-4fd0-8026-16a144c6b41d&pd_rd_w=r0LwZ&pd_rd_wg=4jYy9&pf_rd_p=f325d01c-4658-4593-be83-3e12ca663f0e&pf_rd_r=YVE00Y31KS8TJ3YENVFN&psc=1&refRID=YVE00Y31KS8TJ3YENVFN for one version) and the RCA analog audio cable. I hope this helps. If your TV has analog audio outputs (2 RCA or headphone jack), you may be able to avoid the converter. Connect the HDMI cable from the BDP-S1700 to the TV, then connect your TV audio out to the Onkyo TX8511. Use either an RCA analog audio cable or a Y-cable (3.5 mm to 2 analog RCA), Set the TV to external speakers if you need to. (Some headphone jacks automatically disable the TV speakers when in use.) You may need to adjust the video to audio sync with this method. Check your TV and Onkyo manuals. Cindy Wells

Sony Audio... • Answered on Dec 20, 2020


It is in protect mode because of component level failure or cold solder connections.

Sony Audio... • Answered on Nov 15, 2020


Request the operaitng guide for model MHC-881 directly from Sony.

Sony Audio... • Answered on Oct 29, 2020


You could try checking the DVD discs in a region free player program to see if the DVD is playable. You could try Leawo Blu-ray Player which can play Blu-ray and DVD discs from any region. If the DVD discs can't be played on this player, then it's highly possible that the DVD disc is unplayable.

Sony Audio... • Answered on Oct 29, 2020


This is an electret condenser microphone which isn't a standalone self-energising device and needs a small amount of power and a couple of other components to produce a working device. It is possible the Sony microphone might have some, all or none of those built into the package and this will have to be investigated. The power requirement is typically 2 - 3 volts. http://www.learningaboutelectronics.com/Articles/Electret-microphone-circuit.php

Sony Audio... • Answered on Oct 14, 2020


I am also looking for the same query. Let me know when you find a solution. Thanks

Sony Audio... • Answered on Oct 04, 2020


Unplug the player from the wall, press power button on the player for about 10seconds and plug in power again.

Sony Audio... • Answered on Jul 26, 2020


Assuming you are using a cable to connect your cell phone to the speaker you could be overloading the input of the speaker when you turn the phone volume up very high. That would cause distortion that might damage the speaker so it shuts down or turns off.

Sony Audio... • Answered on Jul 25, 2020


cara membuka protect push power sony MHC-RV8

Sony Audio... • Answered on Jul 02, 2020


Hi my Sony mgongo amplifier says usb protect why ??

Sony Audio... • Answered on Jun 30, 2020


Cause: Battery is 100% discharged. Therefore, PC's USB with 5V/500mA set up has not enough power to start up the charging process because loading current is greater than the set up, therefore USB is disabled immediately due to sudden current load. Remedy: Battery must not be discharged 100% If it happens then the supplied AC adaptor must be used firstly because it is providing 5V/800mA power. After a couple of minutes the unit can be connected to PC without problem then it can continue the charging during file transfer, etc.

Sony Audio... • Answered on Jun 28, 2020


I suspect there is either a problem with the radio (AM side) or most likely it is a matter of poor AM signal strength where you are and/or high levels of interference. With FM reception the wire lead of the earphones acts as a fairly efficient antenna but AM reception is via the internal ferrite rod aerial that also is part of the tuned circuit and consequently is not only highly directional but is sensitive to vertical/horizontal orientation - if the signal is polarised vertical the antenna is more efficient when it too is vertical, unfortunately horizontal polarisation is more common. Development of AM receivers stopped decades ago due to it falling out of favour because of high levels of interference around population centres causing much dissatisfaction and a move to FM and over the last two decades an increased interest in digital radio.

Sony Audio... • Answered on Jun 26, 2020

Not finding what you are looking for?
Sony Bean MP3 Player Logo

35 questions posted

Ask a Question

Usually answered in minutes!

Top Sony Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

76584 Answers

aliasger yq

Level 2 Expert

219 Answers

Alvin Barnabas
Alvin Barnabas

Level 2 Expert

135 Answers

Are you a Sony Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sony Audio Players & Recorders

  • Sony Audio Players & Recorders

Most Popular Question

download songs

  • Audio Players & Recorders
Loading...