20 Most Recent Sony Ericsson Mobile Bluetooth Car Kit HCB-700 works with any Bluetooth phones that support the Head... Headset Questions & Answers

hold the answering button and release it then it starting to flash

Be sure the the headset in in 'Pairing' mode.
When in pairing mode, the light should be flashing red and blue or have a steady blue.
The put most headsets in pairing mode, turn headset OFF, then hold the power button until it goes into pairing mode as discribed above.
Then you can discover it with your phone or PC. Pin (pass key) should be 0000 (4 Zeros) or try 1111, 1234, 9999

Hi Sstoward,
Have you tried 0000
Most default bluetooth passkeys are usually set as that.
I have also found the manual for this and it mentions the same passkey:
HCB-700 User guide
Regards
Mike

i extremly doubt that you will find a place that sells the screens for this because unlike mobile phones these bluethooth kits are ment to stay in one place

and if you did find a screen it would be next to impossible to replace it would have a ribbon cable soldered to the surface board

your better off getting a new one

When you place a new or a existing SIM card from another phone provider into your mobile phone and it asks for a Security code then :-
This phone is locked to the original mobile phone provider. You need to contact this mobile provider to ask for the unlock code (security code) for this phone. You need to provide proof of ownership etc and the phone's unique IMEI number which is located inside the phone under the battery. They use this number to generate the unlock code for your phone.
They should provide you with instructions on how to enter this code into the phone.
Once you unlock the phone, then you can insert a new SIM card in this phone or sign up with another phone provider using this phone.
You could ring the phone provider and ask for the unlock security code because you are going overseas and wish to use your phone with a prepaid SIM card from another country. This maybe a free service.
The other way to get your phone unlock is to use a phone unlocking company on the Internet, they usually charge a couple of Dollars for their services. Use Google and search for "Security unlocking code” companies in your area.

It depends on your new phone, check with sony ericsson to see if there is a new cradle.


http://www.sonyericsson.com/cws/products/accessories?lc=en&cc=gb#view=accessories&cdl=0&s=0&detail=0&cmp=0&acc_cid=20434&cid=0&acc_pid=0&pid=0

semes to be coppe wire inside it cut so if it move it work then move stop so chik with voltmeter if find where is the cut u can soldring it agin if not have new one

if the chocking coil that is placed bet charging fuse and charging input pin of UEM(universal energy management) is not working properly the set wont charge or else if protection anode is short circuited also device wont charge

I would suggest don't buy SCRAP.

Hi there, I have been getting low signal problem.. also when i speaking with my friends its got call ends itself. And more often its shows "Emergency". Could u please Help me ASAP

flash the phone corrupted firmware. try www.totalgsm.org costs 10euros takes 10mins see my other posts for a full explanation

Ive had this exact same problem! I can't even install the update, some sort of macromedia error. Please help us!

There is a good chance that your sim card is too old a version to be read by newer phones. Although the shape is the same, the format just isn't recognized. Time to upgrade your simcard is all.

ttry pressing & holding 5 or 0. Could be corrupted firmware or just a dodgy flash. if all else fails flash the phone. www.totalgsm.org is website i use. see my other posts on this subject. use generic firmware its much better

corrupted firmware flash it. www.totalgsm.org costs 10euros

corrupted firmware that is. flash the fone. try www.totalgsm.org costs 10euros follow the instuctions to the letter. use generic firmware.

flash the phone
try www.totalgsm.org gr8 support. see my post on other thread for a full guide. costs 10euros