20 Most Recent
Uniden TCX905 Cordless Expansion Handset - Page 4 Questions & Answers
My uniden DECT 6.0 telephone when plugged in constantly rings. I can't find anything in the manual on how to fix this.
The problem sounds like a wiring fault to me. Landlines ring when the POTS (plain old telephone system) provides power on the receive wire. See
https://www.lanshack.com/wire_phone_jack.aspx for the RJ-11 wiring diagram.
Try a different phone at the jack and a different telephone cord. If it rings constantly, that tells you the problem is with the wiring in the building or outside. You need to find where additional electricity is coming into the telephone wiring. Check the jack first. Most jacks either have screw terminals or keystones. Use the wiring diagram above to make sure that the wires are connected to the correct point. If you have the screw type of terminal, you need to strip the insulation from the conductors before securing the wires. For the keystones, leave the insulation intact. Then use a punch-down tool (available at most hardware stores in the electrical section) to push the wire into the correct slot in the keystone.
There must be a place where the insulation is damaged and touching another wire or water is in contact with bare metal and a current is flowing across the water. If only the Uniden phone rings constantly even with the new RJ-11 cable, replace the phone.
I hope this helps.
Cindy Wells
Setting time & date for uniden home phone exs9500 serial # 94028608
The directions to set the date and time on the Uniden EXS9500 are shown in the manual starting on page 21. Press and hold the Clock button (the second button from the left below the answering system buttons) on the base until you hear a beep. Use the Skip/Repeat buttons (the two end buttons of the answering system buttons) to select the current day of the week. The LCD with show 0 through 6 and the voice prompt will list the day of the week. Press Clock when the correct day of the week is announced. Use the Skip/Repeat buttons to select the current hour (1-12). Press Clock to set the hour. Use the Skip/Repeat buttons to select the current minutes and press Clock to save the setting. Use the Skip/Repeat buttons to select AM/PM and press Clock to save the current time and exit the clock setting menu.
ManualsLib has the directions starting here:
https://www.manualslib.com/manual/334436/Uniden-Exs9500.html?page=21#manual .
I hope this helps.
Cindy Wells
Uniden cordless phone visual ringer keeps blinking
It is the indicator that you have a voice mail (answering service that comes with your phone provider. Contact them to tell you how to access it.
to access iprimus voice mail, dial your own number it will then ask for your PIN, if you have not set this up the default number is your area code ie. 02 Sydney 03 Melbourne etc. and the last 2 numbers of your phone number
Uniden dect 6.0 turn off CID recording
I find no way to disable the CID record feature.
If you wish to neither see nor record CID, contact your service provide and unsubscribe to the CID service.
A copy of the user manual is available at;
http://www.uniden.info/download/ompdf/DECT1580om.pdf
To delete all the recorded Caller ID numbers with the handset do the following;
When the phone is in standby, press ID (on the 4-way navigation function key), then press MENU/SELECT, then select Delete All. When the phone asks you to confirm, select Yes.
Not finding what you are looking for?