20 Most Recent
- Page 9 Questions & Answers
I can't get my motorola h500 to pair to my nokia
To pair the headset, first turn off the headset if it’s not already
off, hold the multi-function button until the LED light turns solid
blue (not blinking blue) with an audio indication, then use your phone
to discover and pair with the headset using “0000” as the default pass
on May 13, 2009
Cannot synch h500 to new blackberry 7130
Don't forget to start with your headset off...then turn it on, but HOLD the on/off button down until the flashing blue light turns to solid blue light. This gets it into "sync" mode. The password is 0000 but it does not always work the first time. Don't give up! Try it again if it fails with the first try! Good luck!
on May 06, 2009
I CHARGED MY BRAND NEW MOTO H500 HEADSET FOR 3 HRS CAME BACK AND BLUE LIGHT WAS OFF. THAT MEANS FULLY CHARGED. WHEN DISCONNECTED FROM CHARGER. I TRIED TO TURN IT ON AND NO LIGHT OCCURED. FLASHING.. STEADY... PULSING... OR ANYTHING
on May 05, 2009
Problems With Pairing H500 and Motorola V190
1.Press and hold the Multifunction button in the middle of a boom headset while the headset is closed. The light will glow blue.
2.Open the boom microphone and the blue light should remain on. If not, repeat step 1.
3.On the cell phone, press Menu > Settings > Connection > Bluetooth > Handsfree > New Device
4.Select H500once a connection is detected.
5.The passkey "0000" is now entered to confirm the connection has been made.
6.The cell phone screen will now read "Bluetooth Connection".
1.Provided you set the Bluetooth power to "On" after the initial connection has been made, the phone will automatically re-connect to the headset.
2.To set the Bluetooth power on - Press Menu, Select Settings, then Connections, then Bluetooth link, scroll to Setup and select that. Scroll to Power and chose Change. Scroll to On and press Select. The screen should now read "Changed: Power On".
3.Test Your Connection: Close the headset and watch for cell phone to say "Disconnected". Re-open the headset and the phone should be connected automatically and will now display "Bluetooth Connected".
please give good rating if the solution works.
Thanks for using FixYa.
on Apr 23, 2009
I need a code for the motorola H500
the code is 0000
if that fails try 1234
all blue tooth devices are the same.
if that code fails then there is a problem with the device. Normally these arent repaired its replaced. Warranty will cover a replacement.
on Apr 05, 2009
Not finding what you are looking for?