20 Most Recent
Motorola Mobility H500 Wireless Headset - Page 4 Questions & Answers
How do I put my
Here are the steps to put it into pairing mode. Also please make sure you click the YES button below my response here to indicate my answer was helpful. It would mean a great deal to me if you could do so. Thank you
1. With the headset power off, press and hold
the Call button for 6 to 10 seconds until the
blue indicator light turns on and remains
steadily lit. (The light will flash while you
hold the Call button.)
2. If the indicator light is flashing or does not
remain steadily lit, turn off the headset and
repeat step 1.
10/11/2010 2:28:39 AM •
Motorola...
•
Answered
on Oct 11, 2010
PASS KEY FOR A SANSUNG
Most phones use either 0000 or 1111.
Other can just automatically connect to the headset when
following the steps to pair a device.
10/5/2010 1:26:26 AM •
Motorola...
•
Answered
on Oct 05, 2010
Need a passkey for my
Hi,
Pass code for motorola headset to pair with blackberry mobile is 0000
Thank You
8/30/2010 12:45:12 PM •
Motorola...
•
Answered
on Aug 30, 2010
I have a verizon motorolo
Hi,
To pair your motorola headset with phone please go to below website.
http://www.motorola.com/mdirect/demos/how2_h500/h500.html
This website shows you video guide how to pair the head set to phone.
ThankYou
8/30/2010 9:32:01 AM •
Motorola...
•
Answered
on Aug 30, 2010
Manual
Hello and Welcome to FixYa!
Here is the link for the desired manual,
Click here
Have a good day,
Concerned,
Waqar.
8/18/2010 7:26:22 PM •
Motorola...
•
Answered
on Aug 18, 2010
My bluetooth was connected to my phone and one
Start with your headset turned off. Then, press and hold the call button for 6 to 10 seconds, until the indicator light is steadily lit (it will flash as if it was being turned on, but don't release the button at that phase). It is in pairing mode. Now make your phone's bluetooth application search for new devices. After a while, the H500 will appear on-screen. Select it and make it connect. If a pairing code (or PIN, or passkey) is requested, enter '0000' (four zeros). If the pairing process is successful, the indicator light will flash rapidly, and then, it will enter the stand-by mode. Otherwise, turn your headset off, and go through the whole process again.
Hope you are able to sort your problems out.
Regards,
Carlos
7/20/2010 3:31:29 AM •
Motorola...
•
Answered
on Jul 20, 2010
The default code is not working for my motorola
here is the manual for the headset
http://www.starbatteries.com/moh5blheowma.html
half way down the page click on "View the product manual..." and open it.
Motorola states that the pairing code is "0000" and can not be changed.
make sure it is fully charged before pairing.
hope it works.
7/5/2010 6:23:15 AM •
Motorola...
•
Answered
on Jul 05, 2010
Tune being played
I would contact Motorola and find out what the problem is with your headset.
7/1/2010 2:24:50 PM •
Motorola...
•
Answered
on Jul 01, 2010
Pairing instructions for motorola H500 headset
Hold the
phone button down for about 4 seconds.. The light should blink 2 times and then stay on to add device to your phone once connected light will go out...Hold button down again light will blink 3 times and go off...........
6/30/2010 4:09:18 AM •
Motorola...
•
Answered
on Jun 30, 2010
How put my device in discoverable mode?
Hold the phone button down for about 4 seconds.. The light should blink 2 times and
then stay on to add device once connected light will go
out...Hold button down again light will blink 3 times and go
off...........
6/30/2010 4:01:31 AM •
Motorola...
•
Answered
on Jun 30, 2010
Not finding what you are looking for?