Turn on your printer.
Lift the printer unit, and position the scanner support
between the tabs to hold it open.
The ink cartridge
carrier moves and stops at the loading position unless the printer is busy.
Press down on the ink cartridge lever to raise the ink cartridge
lid.
Remove the old ink
cartridge.
Dispose of the old cartridge properly.
If you are installing a new ink cartridge, remove the
sticker and transparent tape from the back and bottom of the ink cartridge.
Insert the new ink cartridge.
Snap the lid closed.
Lift the printer unit, and hold the scanner support up while
lowering the printer unit until it is completely closed.
DON'T FORGET TO RATE THE SOLUTION, THUMBS UP!
Remove your printer from the PC and uninstall the printer software. Now reinstall the printer software and connect the Printer to be detected and installed. Check printer properties to see the ink levels.
Use head cleaning before a test is taken . It is possible that the cartridge is not contacting to the board .It can also be poor ink cartridge contacts.remove reset and repeat once again.
197 questions posted
Usually answered in minutes!
995 Questions
574 Questions
608 Questions
501 Questions
509 Questions