20 Most Recent HP DeskJet 656 Thermal Printer - Page 3 Questions & Answers

If you are unable to install the driver software check if there are any driver files that have not been removed from your computer (this might have been installed during the incomplete installation). Also, check if you are installing the correct driver and if you have selected the correct operating system. Open Change device Installation, and then select the Change device installation settings Control Panel setting. In the Device Installation Settings window, select the option to automatically download the driver. Get ready for driver installation by connecting your printer to the computer with a USB cable or through your local network. Open Devices and Printers and select your printer's name, if it is not listed, then add your printer to the list. You can also download the driver software from our website. Double-click the downloaded driver file, click Run and the installation will begin. Follow the on-screen prompts to complete the installation. The driver software can also be installed from the driver CD. Load the CD in the drive and begin the installation. You can choose between Custom install and Easy install. It always better to install all the features. Follow the on-screen instructions and install the driver. Check if you can Print a document after the installation. If you are unable to Print, then follow the troubleshooting procedure or call our tech support for assistance. Guideline to install the HP Printer Drivers visit https://goo.gl/wPGPzp

You have to check the settings when sending a print job through If you need further help, I’m available over the phone at https://www.6ya.com/expert/alex_22751bbefa74c3d0

Try going into Devices and Printers and making sure that your printer is set as default. also, when you hit CTRL+P it should give you an option as to which printer you would like to send the print job to. If you don't see your printer listed there as the primary printer, it is not set up as default. To set your printer as default click: Start>Devices and Printers>( in here you should see your printer listed. If you do and there is NOT a green circle with a white check in it, go over to your printer icon, right click your mouse, set as default printer and left click your mouse. this should set your HP printer as default. Hope this helps.

http://h10032.www1.hp.com/ctg/Manual/c01714002 The manual will tell you the steps needed to replace ink cartridges.

Have you connected both ends of the USB cable ? Check if you have paused printing on the windows spooler ? Check if the port is correctly configured on the control panel Install Printer using Windows 7

place the document in the scanner in the printer go to device and scan a page will come up with where the document is to go and there will be scan as pdf document press start

The Printer Icon its self you can't add to the taskbar, but you can add it to the desktop by simply dragging and dropping it there.