20 Most Recent
HP OfficeJet R45 InkJet Printer Questions & Answers
I have a HP Officejet
Hi The no of parts that hp supply is small but the best place to see if hp supply this as a part is a site www.partsurfer.hp.com
this will get the part no then google the part no to get a price
I hope this is a help
Yours Ian
Hp r 45 "scaner failure"
Normally the light level of the lamp (not bright)
if it is the lamp then in my experience it will be beyond economic repair.
have a look around the machine to see if it has a scanner lock and unlock it
I have a HP Photosmart
Hi
If you have clean print heads as instructed on this website
,you need to replace printheads
Please vote me to keep me alive
Error in scannersystem
Do a Reset on the Printer
Disconnect the Power Cord ( while printer is power on), While holding the Power Button Connect the Cord and release the power button on printer after 5 seconds
Not shutting down afer reporting scanner error
I have hp printer model R45
I got scanner error and printer asked me to turn power off and on. I turn the power off/on. Its about a month the Problem has started
Please HELP
Thanks
amin
Drivers
i needed in all model hp drivers
How to reset printer hp offiject 6700
- If the user cannot solve an issue that has been troubleshooting frequently, then obviously the last thing would do is to reset the printer.
- To perform a reset, turn on the 123.hp.com/oj6700 printer by pressing the power button.
- With the printer turned ON, disconnect the power cord from the rear end of the printer.
- Remove the power cord from the wall outlet. Wait for a few seconds and re-connect the power plug back to the outlet.
- Reconnect the power cord to the printer's rear. If the printer does not turn ON automatically, press the Power button. for More visit https://goo.gl/t55XMJ Call Our Toll-Free 1 888 224 4280
Office jet pro 8710. will not print says the paper size detected 0 by the printer does not match the paper size selected (8.5x11in) for the print job
The Officejet 8710 printer can face paper mismatch issues if the paper settings are not set properly in the Print Preview box. Try setting the Paper Type option to Plain in the settings window that appears before performing the print. Change the settings to 8.5 x 11 in both the copier and the printer setting. There can also be an issue with the paper tray. Set the paper width guides correctly. Try printing a Configuration report to determine which paper size the printer is configured to. Any bits of paper stuck inside the printer roller might also cause paper feeding errors. Open the cartridge access door of your HP Officejet Pro printer. Wait for the ink cartridges to a position on the left. Look for any pieces of paper inside the cartridge area. If any bits are found, remove them. That should solve your problem. for more support Call our Toll-Free 1-866-293-9220 or visit
https://goo.gl/Pkv63e
Not finding what you are looking for?