20 Most Recent HP PSC 1350v All-In-One InkJet Printer - Page 4 Questions & Answers

IT could be but you need to inspect the cables as well. IT could be a loose connection in the power supply or to as far as leaking capacitors within the power supply circuit.

you must reinstall the windows and after that install the software drivers and it will work

Hello, please tell us what you have tried to do to silve the problem. have you tried to pug it on another plug? have you pressed the power button for 10 seconds?

OK, sorry to hear about your trouble with the All-N-1
If your are looking for the software needed for your unit, you can find them at HP.com

If you have the All-N-1 hooked up, you will need to disconnect it while installing the program.
Later, as the program loads, it will ask you to power on unit and plug in USB connection.

The entire process may take as long as 20 minutes from start to finish.
P.S. if you have a 1350, your load will be for a 1300 series unit.
If you are using XP, or VISTA, make sure you a installing the correct driver.

Hope this information has been of help to you.

Readers, please rate your technicians.
Thank you,
John Ray
[email protected]

Use this article to check the rollers and make sure they are working properly and properly aligned when you close the rear door. If that doesn't yield results, try resetting the printer by following these instructions. Wait at least the required time before reconnecting...

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!

the first thing you should do is, you just transfer the text to he MS Word, you just highlight and right click then copy after that, paste to the open a MS Word and paste, then try to print if they wil work.

click on start and click on run type servicess.msc and click on enter.
in the new window look for a service called the print spooler and right click it and click on restart then refresh the printer folder around 5 times and that should do it,if that does not work try reinstalling your printer or unpluggin the power cable from the wall jack and the printer waiting for 40 seconds and then reconnecting the power cable to the wall and then to the printer.

if you have a print job stuck go in and hit cancel job. If it stays even after a few min right click "my computer" on your desktop and hit "manage" go to "services and applications" click "services" find the print spooler option and right click it and stop the service. Once stoped right click it again and start it. This should clear anything stuck in print queue trying to delete

try a reset on the printer.see if it works,if not its time to get it serviced.

If you have Windows XP or higher, most of the time your computer will automatically pick up the printer and install if for you. What type of printer do you have? Most times you can also get the driver off of the website for the company that makes the printer. You will just need the make of the printer and the model number.

SOLUTION: Either upgrade to Acrobat version 5 or higher, or use Preview as instructed below:

1. Save the PDF file to the Desktop.
2. Highlight the file and press Apple + i .
3. Click Open with: and select Preview (default).
4. Select File, Print .

to be able to scan you have to go open the control panel then click on "scanners and cameras". From there you should have no problems. The scan button on the printer only works for the alighment with the test sheet.

some system files in c drive are corrupted it may also making this kind of problem.

check printer preferences and settings.

Sir,
Check this link to solve the problem
link 1

Link 2
Thanks Good Luck
Appreciate to rate as "Fixya"

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00809848&cc=ww&lc=en&dlc=en&product=|pm_support_oid|&dlc=en&lang=en?product=306888&lc=en&cc=us&dlc=en&lang=en&cc=us&os=2093

It's done. Cheaper to buy a new one.

Set the printer to print labels along with the software your using... This happends because the printer resets after the next page so set the printer too..


Thanks rulds2008


Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

Sir,
If  u have knowledge in electronics open the printer and check the power board if any IC's is burnt? check the whole printer if there any burnt parts inside. If it is YES better to contact HP or local technician bec. it is difficult to identify which parts is defective. so contact manufacturer for better results....

Link 1 for help

Thanks Good Luck
Appreciate to rate as "Fixya"

Sir,
Click these links and go through the site...
Link 1
Link 2
Thanks Good Luck
Appreciate to rate as "Fixya"