20 Most Recent Copystar Kyocera Taskalfa 181 Copier - Page 7 Questions & Answers


replace the solenoid - part # RK2-0269 Very inexpensive

Office Equipment... | Answered on Sep 16, 2020


Contact Uniden direct. It is very faulty.

Uniden Bearcat SC150B Sportcat Scanner - Universal Radio

www.universal-radio.com > catalog > scanners
Uniden Bearcat SC150B Sportcat Scanner. Bearcat SC-150B. Handheld Scanner.

UNIDEN SC150B USER MANUAL Pdf Download ' ManualsLib

www.manualslib.com > Brands > Uniden Manuals > Scanner > SC150B
View and Download Uniden SC150B user manual online. information radio with ... Also for: Sc150y, Sportcat twin turbo sports scanner, Sportcat sc150, Bearcat ...


Office Equipment... | Answered on Sep 14, 2020


I have an HP Envy 4500. Rather new and it shows: Error Code 0X83C0000A NOS_LOADER_APP What do I do to fix?

Office Equipment... | Answered on Sep 14, 2020


CD030 and CD010 are both HDD (Hard disk errors) and cannot be reset by an end user (must use service mode for diagnostics). I am not finding C-DC codes you listed.

Office Equipment... | Answered on Sep 13, 2020


we can not sad to say for we do not know what you have

Office Equipment... | Answered on Sep 13, 2020


Kala Mistral error 19 is an encoder (motor’s internal hall sensor) error

Office Equipment... | Answered on Sep 09, 2020


https://www.google.com/search?q=clarus+control+error+codes

Looks like it is telling you it has overheated and needs to cool down. If it is a dryer, clean all the filters, the pipes and the vents.

All questions on FIXYA need;
make model (what it is)

Office Equipment... | Answered on Sep 08, 2020


Good morning sir please when I print out any copy it print double and I have change chip what should be the promble

Office Equipment... | Answered on Sep 07, 2020


www.copytechnet.com > ... > Konica Minolta
Aug 7, 2008 - C-2211 (C2211), C-2212(C2212), C-2213 (C2213) or C-2214 (C2214)usually when the machine is running in thick paper mode (1/2 line speed). PROBABLE CAUSES: 1. Incorrect drum speed. Error Code Error Code C2214 with Bizhub C6501 - Copytechnet
Sep. 25, 2015
Error Code PRO 1051 intermittent 2214 - Copytechnet
Dec. 10, 2010
Konica Minolta C6501 - C4501 / C4502 error code
Feb. 2, 2011
Error Code C-2213 bizhub pro 1200p - Copytechnet
Apr. 5, 2013
More results from www.copytechnet.com

video

https://www.youtube.com/watch?v=jiGDLNfIReM

Office Equipment... | Answered on Sep 06, 2020


not sure what a 'misaligned indicator' is, but it is only mentioned here on Fixya!

https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ALeKk00f5eKqMZuRulIsQ_m-4f3p0FiDUA%3A1599403814426&ei=JvdUX-7UGZzAytMP77qyqAs&q=ativa+shredder+misaligned+indicator

Office Equipment... | Answered on Sep 06, 2020


1067 Rana what kind of equipment is this we are not magicians here

Office Equipment... | Answered on Sep 06, 2020


photo paper is normally thicker that normal paper used in printers . try adjusting paper thickness settings to thicker paper or heavier gram weight paper

Office Equipment... | Answered on Sep 04, 2020


We are FIXYA dot com, not the South African Government, an easy mistake to make ??

These people will know

Check matric results ' South African Government

www.gov.za > services > basic-education > check-matric-results
Sep 27, 2018 - You can check your matric results on the Department of Basic Education website. Enter your matric exam number and press search.

Office Equipment... | Answered on Sep 01, 2020


When you get the error message "Replace imaging unit, 0 estimated pgs remain [84.3x]" This means the imaging unit has reached end of life and needs to be replaced. The device will not print, and this message will not be cleared, unless you replace it with part number 50F0Z00
(or 500z)
Vertical streaking. If the imaging unit is near end of life, or the device has had problems with non standard toner, vertical streaks may occur on the page. Replacing the imaging unit will resolve the problem.
Vertical streaks on page
Vertical band at top of page. This typically appears on printed images, but can also appear on text. The most likely cause is toner contamination on the charge roll, however if the band is still visible after printing 30-40 continuous pages this means the imaging unit needs to be replaced.
Vertical Banding on images
Seal failure on the imaging unit. Occasionally seal leaks have been seen from the Imaging Unit.
Toner will be seen on the main frame near the Imaging Unit sides.
If toner build up is excessive, it may even fall into the Tray below. Cleanup with a toner vacuum may be needed.
Replace the Imaging Unit to fix the problem.
Spots, scratches, marks on the page. If they are random, this indicates a problem with toner scatter.If they are repeating patterns, measure the distance between matching marks or spots. If the distance is one of 97mm, 47mm or 38mm, this indicates marks or dents on the imaging unit and it will need to be replaced.
You receive the message Replace defective imaging unit The imaging unit is defective and needs to be replaced. If you just installed it, it will be covered under warranty - contact Lexmark Australia on 1300 362 192
You receive the message Reinstall missing or unresponsive imaging unit and the below instructions don't resolve the problem. Try one or more of the following:
  • Check if the imaging unit is missing. If missing, install the imaging unit.For information on installing the imaging unit, see the "Replacing supplies" section of your device's User's Guide
  • If the imaging unit is installed, then remove the unresponsive imaging unit, and then reinstall it.
  • Note: If the message appears after reinstalling the supply, then the imaging unit is defective. Replace the imaging unit.
You receive the message Replace unsupported imaging unit The imaging unit you attempted to install was either non-genuine, or was from a different region. Buy a genuine Lexmark imaging unit from an authorised Lexmark supplier in your country/region.
You receive a 31.6x error One of the following errors is shown on the display:
31.60 Imaging unit smart chip error
31.61 Imaging unit I2C packet timeout
31.62 Imaging unit I2C packet has been sent but code timed-out on receiving the data (callback)
31.63 Imaging unit security error in the send challenge sequence
31.64 Imaging unit ROM signature error
31.65 Imaging unit stuck busy (status register and/or CRI Arbiter register report busy)
31.66 Toner failed to replenish into the imaging unit
In this case you need to ensure that the imaging unit is properly installed. If yes, check if the imaging unit is supported. Replace with a supported imaging unit if necessary.
If the problem remains, you will need to organise a Lexmark service call (Australia 1300 362 192)
You receive error message 32.11 Imaging unit smart chip compatibility error This could be caused by an unsupported imaging unit (non-genuine or incorrect region). Replace with correct imaging unit to clear this error. If your imaging unit is supported, you will need to organise a Lexmark service call (Australia 1300 362 192).
You receive error message 84 Imaging unit low If expected, replace the imaging unit. If unexpected, call Lexmark Support (Australia 1300 362 192)
Replacing the imaging unit

Office Equipment... | Answered on Sep 01, 2020


https://www.whirlpool.com/content/dam/global/documents/201511/owners-manual-W10795444-RevB.pdf

Office Equipment... | Answered on Aug 28, 2020


If error code F135 appears on your oven. It indicates that the oven door cannot close because the pyrolytic function is on. Check if the top part of the door is intact and secured properly to the door

Office Equipment... | Answered on Aug 28, 2020


Page 33/396 (Xerox 8825, 8830): "LL-41 is displayed when the Fuser heat does not increase to 110? F (43? C) within one minute."
https://www.printertec.com.br/arquivos_download/xerox/xerox8825.pdf

Office Equipment... | Answered on Aug 28, 2020


The only suitable software is from the manufacturers web site.
If they don't support Win10 it won't work properly.

Office Equipment... | Answered on Aug 28, 2020

Not finding what you are looking for?
Copystar Kyocera Taskalfa 181 Copier Logo

23 questions posted

Ask a Question

Usually answered in minutes!

Top Copystar Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

Timothy Van Der...

Level 2 Expert

152 Answers

Are you a Copystar Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Copystar Office Equipment & Supplies

  • Copystar Office Equipment & Supplies

Most Popular Question

plz fix taskalfa 181 c6400 error

  • Office Equipment & Supplies
Loading...