1) The display language can be changed by accessing the setting from the printer's control panel.
2) Go to the printer control panel and choose the settings, select date and language, and choose your preferred language and press ok.
3) After pressing it, the language changes automatically in the printer.
For more printer related support visit our website https://goo.gl/g8nmM7.
Logic says replace the black cartridge...AGAIN!! However, you can put the machine in 'disable cartridge check' mode which is found in the diagnostics menu. This will allow you to remove/interchange cartridges to help identify problem cartridges. Most importantly this will allow you to identify whether you have a black cartridge slot problem which makes it a machine problem or whether you just have a bad cartridge. First thing I would do is run the machine without the black cartridge and see if noise disappears. Good luck!!
Check for bad cartridge, or out of paper, possible small piece of per still jammed. Unhook the usb and see if you can print a manual test, usually depress the one of the buttons on top will print an engine test...
If the machine is still printing normally - don't worry about it. If the cartridge is a refill, or you have re-installed a part used cartridge the printer will have registered a serial code or the chip has not been replaced with a fully compatible one. If the cartridge is an original and still within it's expected life, you may have a developing problem with the printer.
www.ettusaislashes.com Mink 3D Lashes3d faux mink lashes wholesale How to wear 3d faux mink lashes wholesale - Ettusais Lashes Company Wholesale premium individuals style soft natural 3d faux mink lashes wholesale .our mink fake lashes can customized,and can provide lashes package ,lashes tweezer and lashes brush.The price is cheap,and directly sell from our manufacturer.We can give you a big discount.
How to wear Mink 3D Lashes Ettusais Lashes Company
After removing the paper jam, the issue has still persisted, then you need to check the printer drivers. Sometimes, when you remove the any stuck from printer. Then you need to check the printer drivers. Sometime outdated printer drivers may cause of paper jam issue. Read the following methods to fix the printer paper jam issue
49=Firmware error..........
Recycle the printer power (off/on). Test.
Switch off then disconnect all printer cables.
Recycle the printer power (off/on). Check Err.
Switch off and Reboot PC.
Connect all and test.
Try another app to print from.
Try print a different file.
Check your toner cartridge first.
There is more than one cause for this problem. It could also be your transfer roller that needs to be replaced.
Or it could be the scanner that has gone out.
Are you getting an error code?
just happend, today, yesterday was ok, same setup?
or just got this from a garage sale and ...
or found it or barrowed it or >? tell the story please.
no PC stated
no OS stated (windows what?)
to run a printer on USB the printer needs to be reset first.
to USB mode, this is covered in the manual, lost that?
the USB port needs to be working , try them all/?
the HP software needs to be loaded too.
omg its 14 years old today. click software and then click change.
then pick your UNSTATED OS,in the huge list of operating systems this printer supports even up to w10
https://support.hp.com/us-en/product/hp-laserjet-4350-printer-series/412160/model/412162/manuals
