20 Most Recent HP LaserJet 4730 MFP Printer - Page 2 Questions & Answers


Try vista x64 version...click HERE! ,right click the application and select run as administrator .

HP LaserJet 4730... | Answered on Apr 13, 2011


REMOVE CARTRIDGES OUTSIDE, ALSO contacts clean with a soft cloth EASY CLEAN BELT turning smoothly

HP LaserJet 4730... | Answered on Feb 24, 2011


you have to make calibration

HP LaserJet 4730... | Answered on Sep 06, 2010


check under general reference (link below). it should mention how to fax, e:mail and copy. if you copy to file / pc that should work as the scanner.

otherwise make sure the "scanner" facility is installed as some MFP's do not come with all facilities installed. (and therefore may not give the option on the screen.)

http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=en&cc=us&prodClassId=-1&contentType=SupportManual&prodTypeId=18972&prodSeriesId=468688

HP LaserJet 4730... | Answered on Jul 21, 2010


this problem comes due to formatter card it is faulty replacur problem will be resolvee them it will work ...........

HP LaserJet 4730... | Answered on Jul 17, 2010


have a professional take a look at it to see whether there is any internal damage that disallow for copies to be made.

HP LaserJet 4730... | Answered on Jul 16, 2010


Replace the magenta cartridge or replace the plastic clear guide on underside of document feeder if happening using the document feeder

HP LaserJet 4730... | Answered on Jul 16, 2010


restart the printer hold down 6 when backlight illuminateshold till all three lights turn on,relese 6 keythen press 3 or 9 to scrool
press 6 to select the optionu want then enter cold reset starts......


HP LaserJet 4730... | Answered on Jul 14, 2010


Hello,
Unexpected image like barcode as shown below can occur when using the automatic document feeder (ADF). You are using the ADF for incoming faxes. So the problem occurs.
47ba009.gif
If the copy does not look at all like the original document, make sure that no media is on the flatbed glass from a previous copy job.
I hope this helps.
If you would like to vote for the answer, this will help the others to see the similar problems solved and also will be a satisfaction factor for me to continue helping you.
All the best.

HP LaserJet 4730... | Answered on Mar 28, 2010


Try a manual calibration.

1. Press the MENU button.
2. Press the down arrow until “CONFIGURE DEVICE” appears on
the display.
3. Press SELECT.
4. Press the down arrow until “PRINT QUALITY” appears on the
display.
5. Press SELECT.
6. Press the down arrow until “QUICK CALIBRATE NOW” appears
on the display.
7. Press the “SELECT” to start the calibration.

HP LaserJet 4730... | Answered on Dec 09, 2009


Hi kms8
Go to the support section of HP website by clicking on the link below.
  • Read the trouble shooting pages
  • download drivers for your mfp and install
  • download manual
Hopefully your questions will be answered.
luciana44




http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual&lang=en&cc=us&prodSeriesId=468688&prodTypeId=18972

HP LaserJet 4730... | Answered on Oct 09, 2009


Developer motor rotation error.

HP LaserJet... | Answered on Jan 11, 2021


Scanner Error 22

HP LaserJet... | Answered on Dec 15, 2020


Most likely the formatter in my opinion.

HP LaserJet... | Answered on Feb 24, 2020


thisis the farmetter problem

HP LaserJet... | Answered on Nov 11, 2019


Logic says replace the black cartridge...AGAIN!! However, you can put the machine in 'disable cartridge check' mode which is found in the diagnostics menu. This will allow you to remove/interchange cartridges to help identify problem cartridges. Most importantly this will allow you to identify whether you have a black cartridge slot problem which makes it a machine problem or whether you just have a bad cartridge. First thing I would do is run the machine without the black cartridge and see if noise disappears. Good luck!!

HP LaserJet... | Answered on Oct 20, 2019


Juliet. Most likely the scanner lamp, or scanner control unit assembly is defective. If you're technically savvy, you could remove the scan glass and lube the shaft that the scan lamp assy slides on. Sometimes that will fix it. Otherwise, the whole top scan unit will need replacing. That could cost over $300 for the replacement.

HP LaserJet... | Answered on Oct 07, 2019

Not finding what you are looking for?
HP LaserJet 4730 MFP Printer Logo

Popular Tags

51 questions posted

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

efs_perpends
efs_perpends

Level 3 Expert

1997 Answers

Cindy Wells

Level 3 Expert

6220 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

LaserJet HP

  • LaserJet HP

Most Popular Question

cold reset

  • Office Equipment & Supplies
Loading...