20 Most Recent HP PSC 1410 All-In-One InkJet Printer - Page 5 Questions & Answers

. Sometimes the power supply unit must be checked as a poor SMPS unit can deliver low voltage and cause issues to the printer function.You need to be tech savy to check using a multimeter on the power supply input and output voltages. Check all the leads and connections of the mother board , the tags to the ink cartridge. Also check the mechanical settings of the ink cartridge , if jammed or tight remove motor and manually free the drive before it is set back.

http://www.fixya.com/support/r5826301-working_switch_mode_power_supplies

Thank you for using Fixya

download from the site

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=228&lc=en&cc=us&dlc=en&sw_lang=&product=458978#N193

download from the following site

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=228&lc=en&cc=us&dlc=en&sw_lang=&product=458978#N193

try to align the printer heads, here how first you on the unit it print sample pages then face it on the scanner face down press the button scan wait till the power light stop blink then try to print again

You just need to download the drivers from their website. Everything on that disk is free online! You can find everything for your model # here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=441115
Please leave positive feedback! Thanks :)

Hi

Correct you have to replace the cartridge(s) but still try to clean the contacts of cartridge and the contacts in the carriage to try. Normally when you re-fill the ink is spilled. Clean it with a tissue paper or a clean thin cotton cloth.

Go to this HP link and select your OS for the drivers/software:

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=458978

Click on this link or copy and paste the complete link into your browser.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response

Thanks, Joe I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Unable to proceed scan documents after 2/3 pages in - HP PSC 1410 All-in-One which i intend to save in pdf file.

Hello,

Just click on the link below:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=uk&lc=en&dlc=en&product=441115

then choose for your computer's OS from the dropdown button and click on Next. Then follow the steps to download and run.

Thats it. Thank you for using FIxYa.

I think ur printer cartridge ink is finished. Other wise the cartridge circuit is dear.Pls replace ur ink cartridge .inform me result

Please remove all cartridges. Using a moist cloth clean the golden contacts on cartridge as well as printer. DO NOT touch nozzle of cartridge. Dont insert the cartridge yet.

Please do this :
1. Remove the power cable from printer. Remove the USB cable that connects printer to computer (remove it from printer as well as computer's usb port)
2. Press the printer power button and keep pressed for 3 minutes then release
3. Now plug in the power cable and usb cable (connect printer to computer) and power on the printer.

Now insert cartridges and see if error goes away.

You can also click the link below for any future troubleshooting with the printer. It's a self help guide.

Click Here

Regards,
Shrey

P.S. If this did not help, please let me know and will be glad to help you further.

HI,
It seems that you need to clean up the cartridges.
Follow the simple procedure and I hope it should work.
1 open lid to expose cartridge area
2 push power button to power off
3 allow printer to shut down- cartriges will park on the left side.
4 Look for any ink residue under where the cartridges normally are. Gently clean this best You can.You may use a screwdriver then several paper towells and iso alcohol. Under the cartrige area is a black plastic tray which can slide forward. I cleaned best I could under that as well.
5 close lid and power up and it should work.
You shall also hold the restart button on your printer for 1 minute just in a similar way you push it to start.This also helps sometimes.

Let me know if you need any further assistance.