20 Most Recent
Fujitsu ScanPartner fi-5120C Pass-Through Scanner - Page 2 Questions & Answers
FI-5120c
Invalid orientation/long scan combination. Check the KScan ScanDirectionCap and ScanContinuousCap properties and set ScanDirection and ScanContinuous accordingly is for error 20080
and for 20090 means Peripheral stopped by user. Stop button was pressed.
1/5/2009 2:30:03 PM •
Fujitsu...
•
Answered
on Jan 05, 2009
Scanning is quick, but processing the document is very slow
It looks the problem is with your Computer. Do you have enough disk space? Run 1) Scandisk and 2)Defragmenter and check if it is better. Do you have enough Video RAM? Try and increase using the BIOS.
S. Mohan, Chennai, India
11/21/2008 2:17:56 AM •
Fujitsu...
•
Answered
on Nov 21, 2008
File size is too long and is taking ages to send
yes you can reduce it by selecting the resolution. basically you
1. select the dpi as 200*200. because it will give better resolution. No need for going to 600 *600 for text document.
2. you try to crop out (select the particular area of the image).
you try these. If it is not solved you can mail me at
[email protected].
11/11/2008 12:19:01 PM •
Fujitsu...
•
Answered
on Nov 11, 2008
Scanning speed slowed...
did you change your scan resoulution? The quality of your scans will determine how slow it will pass through. another thing to check is weather it is scanning both sides, another option in your scanner properties.
7/23/2008 1:56:44 PM •
Fujitsu...
•
Answered
on Jul 23, 2008
Scanning a black vertical line down the left side of the document
funny thing. I cleaned it. I had looked before, but didn't see the line on the surface of the glass so i thought it was internal. A closer 2nd look revieled a distinct line on the surface of the glass, probably from pen or marker ink that wasnt dry.
Scanner repaired, pride slightly damaged. thanks for the response
7/23/2008 1:49:04 PM •
Fujitsu...
•
Answered
on Jul 23, 2008
Fujitsu 5210c Scanner
Uninstall the scanner software and also the
program you use to access the scanner
Restart the computer and reload the software[s]
Or first try a system restore.
7/5/2007 11:51:47 AM •
Fujitsu...
•
Answered
on Jul 05, 2007
Fujitsu fi-6670 Grinding Noise-Brake Roller?
1. TURN OFF THE SCANNER AND UNPLUG IT FROM THE POWER SOURCE.
2. OPEN THE SCANNER COVER TO ACCESS THE BRAKE ROLLER.
3. INSPECT THE BRAKE ROLLER FOR ANY SIGNS OF WEAR OR DAMAGE.
4. IF THE BRAKE ROLLER LOOKS WORN OUT, YOU WILL NEED TO REPLACE IT WITH A NEW ONE.
5. INSTALL THE NEW BRAKE ROLLER ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.
6. CLOSE THE SCANNER COVER AND PLUG IT BACK IN.
7. TURN ON THE SCANNER AND TEST IT TO SEE IF THE GRINDING NOISE IS GONE.
Fujitsu fi-7160 / fi-7180
The F4:C2 error on your scanners indicates that there is a problem with the background changeover unit, specifically with the black and white (BW) servo motor. It sounds like you have already done some troubleshooting and found that the motor is operating correctly and the changeover flaps and lamps are also working fine. However, the problem seems to be with the scanner's control system not recognizing the correct position of the flaps and continuing to try to move them, causing the gears to slip and the error to occur.
Here are a few additional suggestions for troubleshooting the issue:
- Check the sensor that detects the position of the changeover flaps and ensure that it is clean and properly connected.
- Check the control board or main board of the scanner for any signs of damage or wear and check all the connectors.
- Try to re-flash or update the firmware of the scanner.
- If the problem persists, try replacing the control board or the main board of the scanner.
I have a fujitsu fi-6130 scanner and when i try to download the drivers it say incompatible and my computer deletes the downloads i have a window 10 pro
Unfortunately, the problem is the Windows 10 version. The first few versions of Windows 10 worked with TWAIN scanners. I've forgotten the exact release (possibly 20H2) and later versions of Windows 10 require the WIA (windows image acquisition) scanner drivers. The switch was around the same time as Windows' release that required manufacturers digitally sign the drivers.
The work-around to continue using some TWAIN scanners is the VueScan software from
https://www.hamrick.com/ . This software translates between TWAIN and WIA so that Windows 10 accepts the use of the scanner. Download the software and check if it works with your scanner before you decide to purchase it. The fi-6130 is listed as a supported scanner; I still recommend testing the software. The software puts a watermark on scanned documents when you use the free version. The automatic document feeder will not work properly in the free or basic version. You need the standard or professional license to use the ADF properly.
I hope this helps.
Cindy Wells
(I have an older TWAIN flatbed scanner (Microtek scanMaker S100) and use with VueScan. The hardest part is remembering to open the software. I used Windows Fax and Scan with the scanner since Windows 7 when I got the device.)
Fujitsu fi-5900c-u1 05 error,
-
FUJITSU FI-5900C OPERATOR'S MANUAL Pdf Download ' ...
https://www.manualslib.com/manual/662390/Fujitsu-Fi-5900c.html
Page 1 P3PC-1432-08ENZ0 fi-5900C Image Scanner Operator's Guide... Page 3: Introduction INTRODUCTION Thank you for purchasing the fi-5900C Image Scanner. The fi-5900C is an image scanner designed to scan various documents in large quantities. The fi-5900C has the following features. This manual describes the scanning method using ScandAll 21.
My ScanSnap S1500 does not
To scan a document into the computer you have to start the scan from the manager on the computer ...and there for you need it installed if you do not have it ..The button on the scanner will not send the scanned result to the computer ...but if you choose the job from the desktop command ..
so ..open the printer/scanner utility ..choose scan ..and the mode document or picture..and proceed..
it will ask you where to save it ..or auto place it in the my documents /my scans
If you do not have the complete software ..here is the download support on the site of the manufacturer and you can get the full version from there ..
http://www.fujitsu.com/global/support/computing/peripheral/scanners/ssfaq/setup-pg.htmlget the download form ..fill it up ..and get the snap scan manager ..and use it ...if you have it ..just open it and make the scanning from there ..
Not finding what you are looking for?