Toshiba E-Studio 356 Multifunction Copier - Page 2 - Answered Questions & Fixed issues
Toshiba error e010
https://printcopy.info/?l=en&mod=erc&brand=Toshiba&model=e-Studio%20556&code=E010
Quoting from link above:
Code
E010
Description
Paper not reaching fuser transport sensor: Paper which has passed the fuser unit does not reach the fuser transport sensor.
Remedy
Open the jam access cover. Is there any paper on the transport path or in the fuser unit? ? YES ? Remove the paper. NO Is the fuser transport sensor working? (Perform the input check in the test mode: 03-[FAX]OFF/[7]/[C]) ? ? NO ? 1. Check if the connector of the fuser transport sensor is disconnected. 2. Check if the connector CN332 on the LGC board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open circuited. 4. Check if the conductor pattern on the LGC board is short circuited or open circuited. 5. Replace the fuser transport sensor. 6. Replace the LGC board. YES Is the transfer belt working? ? ? NO ? 1. Check if the connector of the transport belt is disconnected. 2. Check if the connector on the transport motor driving PC board is disconnected. 3. Check if the connector CN341 on the LGC board is disconnected. 4. Check if the connector pins are disconnected and the harnesses are open circuited. 5. Check if the conductor pattern on the LGC board is short circuited or open circuited. 6. Replace the transport motor driving PC board. 7. Replace the LGC board. YES Is the drum separation finger solenoid working? (Perform the output check in the test mode: 03-111,161) ? ? NO ? 1. Check if the connector of the drum separation finger solenoid is disconnected. 2. Check if the connector CN339 on the LGC board is disconnected. 3. Check the installation state of cleaner. 4. Is the relay connector connecting the cleaner unit and the equipment disconnected or stained with toner? 5. Replace the drum separation finger solenoid. 6. Replace the LGC board. YES Is the registration sensor working? (Perform the input check in the test mode: 03-[FAX]ON/[4]/[E]) ? ? NO ? 1. Check if the connector of the registration sensor is disconnected. 2. Check if the registration sensor is installed correctly. 3. Check if the registration actuator is operating properly. 4. Check if the connector CN341 on the LGC board is disconnected. 5. Check if the connector pins are disconnected and the harnesses are open circuited. 6. Check if the conductor pattern on the LGC board is short circuited or open circuited. 7. Replace the registration sensor. 8. Replace the LGC board. YES Is the registration motor working? (Perform the output check in the test mode: 03-108/158) ? ? NO ? 1. Check if the connector of the registration roller clutch is disconnected. 2. Check if the connector CN341 on the LGC board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open circuited. 4. Check if the conductor pattern on the LGC board is short circuited or open circuited. 5. Replace the registration roller clutch. 6. Replace the LGC board. YES Check if there is any abnormality in the space between the registration motor and the registration roller (metal). Check if the registration roller (rubber) is rotating smoothly. Check the condition of the registration roller at the horizontal transport section and clean or replace it. * If the error [E010] caused by a paper jam underneath the drum cleaner often occurs due to an insufficient paper separation from the photoconductive drum, set a smaller value in the code 08-841, and see what happens. At this time, however, pay attention to the transferability at the leading edge of the paper since this transferability can be slightly narrowed depending on the environments and conditions under which the equipment is placed or the media type of the paper used. (Refer to 3.6.1 in this manual about the details of the code 08-841.)
Why is my Toshiba label printer printing black labels
I suggest to see this pagehttps://toshibaprinters.com/technical_information/errormessages.htmand try the maintenance procedure given in this pagehttp://support.efficientbi.com/knowledge-base/printer-periodically-skips-a-label-thermal-printer-problem/and this pagehttps://www.usps.com/stamp-collecting/assets/images/TOSHIBA_Label_Printer_Cleaning_Instructions.pdfThis may resolve your issue.
Toshiba e-studio 166 printing black pages when copying
If your Toshiba estudio 166 is producing completely black pages when scanning or copying, there are a few potential causes for this issue. Here are some troubleshooting steps you can take to resolve the problem:
1. Check the scanner glass: Open the scanner lid and inspect the glass surface for any dirt, smudges, or debris. Clean the glass using a lint-free cloth and glass cleaner specifically designed for scanners. Ensure there are no obstructions that could interfere with the scanning process.
2. Verify the scanning settings: Make sure that the scanning settings are properly configured. Check if the scanner is set to scan in color or grayscale mode, as well as the resolution settings. Adjust the settings according to your requirements and test the scanning process again.
3. Clean the scanning components: Over time, the scanning components, such as the scanning lamp and mirrors, can accumulate dust or dirt, affecting the quality of the scanned or copied images. Consult the user manual or manufacturer's guidelines to learn how to clean these components properly. Be cautious when handling sensitive parts.
4. Check the toner cartridge: If the printed copies are also coming out completely black, the issue could be related to the toner cartridge. Ensure that the toner cartridge is correctly installed and has enough toner. If the toner level is low, replace the cartridge with a new one.
5. Perform a factory reset: Sometimes, resetting the device to its default settings can resolve issues. Locate the factory reset option in the printer's settings or refer to the user manual for instructions on how to perform a reset. Keep in mind that a factory reset will remove any custom settings you may have configured.
6. Update firmware and drivers: Visit the Toshiba website or contact their customer support to check for any available firmware updates or driver patches for your printer model. Keeping the printer's firmware and drivers up to date can often resolve various performance issues.
If you have followed these troubleshooting steps and the problem persists, it may be necessary to contact Toshiba's customer support or consult a printer technician for further assistance. They will have specific knowledge and resources to help diagnose and resolve the issue with your Toshiba estudio 166.
Please my toshiba printer shows call for services and I press I press cancel and 8 is not showing code please what can I do
I can try to help. When the printer displays "call for service," it usually indicates a significant issue that requires a professional technician to address. However, you can try a few basic troubleshooting steps that might resolve the issue or reveal the error code to better understand the problem.
1. Power cycle the printer: Turn off the printer, unplug the power cable from the wall outlet, and wait for a few minutes. Plug the power cable back in, and turn the printer back on. This might clear any temporary errors or abnormalities.
2. Check for paper jams and remove any foreign objects: Open the printer's covers and inspect for any paper jams or foreign objects that might obstruct the printer's functionality. Remove any issues found and close the covers.
3. Update the printer's firmware: Check the manufacturer's website for any available firmware updates and follow the appropriate steps to update the firmware on your printer.
Toshiba Estudio 4508A has an error code of F101. How do I fix it please?
Question edited for clarity
https://www.copytechnet.com/forums/toshiba/142847-toshiba-estudio-3508a-error-f101-1-a.html
HDD, SYS board, Setting 1. Turn the power of the equipment OFF and check the
connection of the HDD.
- Connector and harness check
- Check if the connector pins of the HDD are bent.
- Check if HDD for other equipment is not installed.
- Check if SRAM for other equipment is not installed.
2. If the error still occurs after step 1, perform the following.
- Perform HS-73 Firmware Assist mode -> Key
Backup/Restore and check that each Key Status is
"OK".
- If not, recover the key (press [Key] and select the
menu, and then press [Execute]).
3. If the error still persists after step 2, perform the
following.
- Perform HS-73 Firmware Assist mode -> Format
HDD, and then install "System software" (HS-49
Firmware Update mode -> SYSTEM SOFTWARE
(HD Data)).
Notes:
The following items will be deleted by HS-73
Firmware Assist mode -> Format HDD.
• Message Log
• Job Log
• Spool Data (Print, Email reception)
• Template
If F101_1 occurs with secure HDD or the error
persists after performing step 3, perform step 3 after
performing HS-74 HDD Assist mode -> Revert
Factory Initial Status HDD.
4. If the error persists even after step 3, replace the HDD.
5. If the error persists even after step 4, replace the HDD
harness.
https://www.google.com/search?q=Toshiba+estudio+4508A+has+an+error+code+of+F101
..
My Toshiba e-Studio 3555c is not recognizing my new yellow toner cartridge.
If your Toshiba e-Studio 3555c is not recognizing your new yellow toner cartridge, there are a few steps you can take to troubleshoot the issue:
- Make sure that the toner cartridge is properly installed. Remove the toner cartridge and reinsert it, making sure that it is securely in place.
- Check the toner cartridge for any signs of damage or wear. If the toner cartridge is damaged, it will need to be replaced.
- Clean the contacts on the toner cartridge and in the printer. Over time, the contacts can become dirty or corroded, which can interfere with communication between the toner cartridge and the printer.
- Try a different yellow toner cartridge. It is possible that the toner cartridge you are using is defective or incompatible with your printer.
- Restart your printer. Sometimes, simply restarting the printer can help to resolve communication issues between the toner cartridge and the printer.
If none of these steps resolve the issue, it is possible that there is a problem with the printer's toner sensor or other hardware components. In this case, it may be necessary to contact a professional printer technician to diagnose and fix the issue.
Not finding what you are looking for?
