20 Most Recent Toshiba E-Studio 356 Multifunction Copier - Page 9 Questions & Answers


how to reset toshiba e studio 223

Toshiba Office... | Answered on Dec 31, 2018


Perform the following:
1. Turn ON the power while [0] and [8] are pressed
simultaneously.
2. Key in "2002", then press [START].
3. Change the current status counter value "3" or "4" to "0",
then press [OK] (to cancel [C413 / C414]).
4. Turn the power OFF and then back ON. Make sure that the
equipment enters the normal ready state.

Toshiba Office... | Answered on Dec 20, 2018


The wrench sign indicates it needs maintenance. Look up your service contract, to check who you should call for this.
When you don't have a contact you could call a Toshiba certified service centre close to you.

Toshiba Office... | Answered on Dec 12, 2018


Factory default can be done via panel

Toshiba Office... | Answered on Nov 20, 2018


High-voltage section 1. Is the main charger installed securely? 2. Check if the spring of high-voltage supply contact point is deformed. 3. Check if the needle electrode is broken or the main charger grid is deformed. 4. Check if any foreign matters is on the needle electrode or the main charger grid. 5. Check if the transfer roller and the separation needle are installed securely. 6. Check if the transfer roller or the separation needle is removed. 7. Check if there is any foreign matter attached on the transfer roller or the separation needle.

Toshiba Office... | Answered on Nov 13, 2018


the hard drive contents have been corrupted. Thread studio 4555c error f101 sub code 1 good luck with that one. i suggest you start reading the service manual but the link provides you with the idea.

Toshiba Office... | Answered on Nov 05, 2018


Fuser error...Clear it using 08-400 "0".
If problem persist, check themistor

Toshiba Office... | Answered on Nov 04, 2018


Open front cover, loose 2 screws and take out process unit.
Unscrew 2 screws & harness to remove the cover
Take out drum unit, remove LED, main charge
Loose the bush and take out the drum...Dispose the waste toner, check/replace the recovery blade & drum blade as well.

Toshiba Office... | Answered on Oct 20, 2018


Default service password is blank...

Toshiba Office... | Answered on Oct 20, 2018


Reset code? There is factory default on the control panel...

Format hdd & update firmware will also reset all the settings & storages, but not the counter...

Toshiba Office... | Answered on Oct 20, 2018


Did u means automatic gamma adjustment?

When new machine is unpacked, need to perform above adjustment, will print out a chart and put it on the original glass for scanning...

Below is the code to perform this adjustment.
05-7165 *make sure chart can be print out nicely

Toshiba Office... | Answered on Oct 20, 2018

Not finding what you are looking for?
Toshiba E-Studio 356 Multifunction Copier Logo

Popular Tags

33 questions posted

Ask a Question

Usually answered in minutes!

Top Toshiba Office Equipment & Supplies Experts

Timothy Van Der...

Level 2 Expert

152 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6960 Answers

Are you a Toshiba Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Toshiba Office Equipment & Supplies

  • Toshiba Office Equipment & Supplies

Most Popular Question

toshiba e 356 error c440

  • Office Equipment & Supplies
Loading...