20 Most Recent Toshiba E-Studio 356 Multifunction Copier - Page 8 Questions & Answers


This is a Hard drive failure. The hard drive would need to be replaced and firmware installed on it to resolve your problem.

Toshiba Office... | Answered on Jan 28, 2019


Perform 08-2002 "0" to clear the error

If problem persist, clean/replace the themopiles

Toshiba Office... | Answered on Jan 27, 2019


Upper drawer misfeeding (Paper not reaching the
1st transport sensor):

Toshiba Office... | Answered on Jan 25, 2019


Hi Jawad, I hope you came right if not you can maybe ask the guys over at Thoshibatech?



Toshiba Copiers South Africa 1 Toshiba Printers For Sale

Toshiba Office... | Answered on Jan 20, 2019


F110 is SYS board error, check the connector & harness CN123

Toshiba Office... | Answered on Jan 18, 2019


First of all, go to the Toshiba website for the copier, check downloads, and see if it is compatible with Windows XP 64bit. If there is a software download for it, download it and hook up the copier.
Good luck...

Toshiba Office... | Answered on Jan 16, 2019


F900 is Model Information Error

Perform SRAM-Re-Initialize Support
If cannot, perform Key FROM to SRAM

Toshiba Office... | Answered on Jan 14, 2019


Replace genuine toner...

Toshiba Office... | Answered on Jan 10, 2019


Cleaning the various rollers with an "air can" to get rid of the paper dust usually helps.
If it's really old, maybe replacing the primary pickup roller is an option, as low as $20 for some companies. Not sure which modek you have, you left that out.

Toshiba Office... | Answered on Jan 09, 2019


The first thing to check is the main charger unit. The wire/needle and grid could be broken or deformed. This can cause this code.

Toshiba Office... | Answered on Jan 08, 2019


This is a communication error between system board and logic board. One or both of these boards have likely failed and would require replacement to resolve.

Toshiba Office... | Answered on Jan 08, 2019


Check the paper path. Something is blocking the senor tripping the error.

Toshiba Office... | Answered on Jan 05, 2019


that error is due to heat related issue. After repairing the matter which caused the error [C411], perform the following: 1. Turn ON the power while [0] and [8] are pressed simultaneously. 2. Key in "2002", then press [START]. 3. Change the current status counter value "1" or "2" to "0", then press [OK] (to cancel [C411]). 4. Turn the power OFF and then back ON. Make sure that the equipment enters the normal ready state.

Toshiba Office... | Answered on Jan 04, 2019


find better work skill to work and know to inforamation now you find easly

Toshiba Office... | Answered on Jan 02, 2019

Not finding what you are looking for?
Toshiba E-Studio 356 Multifunction Copier Logo

Popular Tags

33 questions posted

Ask a Question

Usually answered in minutes!

Top Toshiba Office Equipment & Supplies Experts

Timothy Van Der...

Level 2 Expert

152 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6960 Answers

Are you a Toshiba Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...