20 Most Recent Toshiba E-Studio 356 Multifunction Copier - Page 7 Questions & Answers


Go to the Toshiba sight on google, give name of unit , then say driver download. They will give you the download and the update. FOR free.

Toshiba Office... | Answered on Mar 27, 2019


Technology Time: Toshiba Error codes

www.mytechtime.com/2011/04/toshiba-errors.html
Toshiba E-Studio machines do not display service code automatically. ... All codes, except fuser errors are reset by turning the machine off and back on again. ... holding down "0" and 8" keys, enter 251 to set PM limit, and 252 to see the number of copies that have been run since the last PM. ...Toner transport motor problem.

Toshiba Office... | Answered on Mar 15, 2019


Check the tray up motor, the tray is not lifted up...

Toshiba Office... | Answered on Mar 06, 2019


I can think of two things. First go to the preferences in the printers settings and see if it is set to "draft" and if so select "normal". Second take out the cartridges and very gently clean the heads with a soft damp cloth. Sometimes ink builds up and blocks the head.

Toshiba Office... | Answered on Mar 05, 2019


There are videos on YouTube that should help.

Toshiba Office... | Answered on Mar 04, 2019


Try to cook two eggs and then with warm water wash your hands . With left hand holding your right ear see if you can touch tip of your nose and copy all of this without thinking at all

Toshiba Office... | Answered on Mar 02, 2019


The toner is dust-like ink the copiers use to print with. When it's over there is no sense to continue waste paper trying to copy, so the copier stops waiting for new toner. Buy new toner cartridge, open the front cover/door, push the top left green handle and pull the old cartridge. Put the new cartridge until click and close the cover/door. This should resolve the problem. If you want to get dirty, you can buy much cheaper draft toner in a bottle or bag, and pour it into the empty cartridge. There is a removable round cap on the front side for this purpose. Also you'll need to buy a new counter chip to replace the old one so the copier will know the cartridge is full. It is located on the back end of the toner cartridge. It would be great if you remove entirely the remains of the old toner from the cartridge before refilling, because toners sometimes differs from each other and mixing them distorts the fine nano-structures the particles form and the result is stained printout. Good luck!

Toshiba Office... | Answered on Feb 27, 2019


The instructions are in the owner's manual.

Toshiba Office... | Answered on Feb 27, 2019


Once open front cover, u can see a connector attached to the process unit, make sure it is connected, otherwise "Latch developer unit" will pop out

Toshiba Office... | Answered on Feb 11, 2019

Not finding what you are looking for?
Toshiba E-Studio 356 Multifunction Copier Logo

Popular Tags

33 questions posted

Ask a Question

Usually answered in minutes!

Top Toshiba Office Equipment & Supplies Experts

Timothy Van Der...

Level 2 Expert

152 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6960 Answers

Are you a Toshiba Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Toshiba Office Equipment & Supplies

  • Toshiba Office Equipment & Supplies

Most Popular Question

toner cartage not recongnized in toshiba

  • Office Equipment & Supplies
Loading...