20 Most Recent Toshiba E-Studio 356 Multifunction Copier - Page 2 Questions & Answers

Fit a Toshiba branded toner cartridge.

Toshiba Office... | Answered on Nov 14, 2020

You need to check that your Printer is not in Printer Offline using mode. For this, you need to go to Devices in Windows settings and then click on Printers. Now, choose your own Printer from the list and then click on Open queue. Make sure that the Use Printer Offline option is unchecked. If it is checked, uncheck it.

Toshiba Office... | Answered on Oct 14, 2020

Super easy online work which can gave you extra $15 k every month online. Last month i have earned $14825 from this home based job just by work online for 3 hrs maximum a day. While stay at home earn money online easily. Want to make extra cash? go to this web page right now.........
Here's what I've been doing............ www.worksbaar.com

Toshiba Office... | Answered on Oct 14, 2020

Check if the printer is connected to the computer.
Check if the printer cable is faulty
Check printer drivers
Lastly, Go to the Start icon on the bottom left of your screen then choose Control Panel and then Devices and Printers. Right click the printer in question and select "See what's printing". From the window that opens choose "Printer" from the menu bar at the top. Select "Use Printer Online" from the drop down menu

Toshiba Office... | Answered on Oct 08, 2020

1. Open the front cover
2. Remove waste toner box
3. Remove developer unit
4. Put down the power switch actuator
5. Remove screws (2 special screws can only be loosen) and pull out the process unit
6. Separate the transfer belt from the process unit
7. Remove the main charger unit and u can change the drum

Toshiba Office... | Answered on Sep 22, 2020

  1. Turn off the power switch.
  2. Hold then Press "0 & 8" while turning it on.
  3. You Will Be in Test Mode Then, then press the "263" and "start" button.
  4. You will see your DEFAULT PASSWORD 123456 on the screen, clear the old password and enter the new password and press the "Start" key.
  5. Then switch off the machine and turn it back on the power socket. You can see reset your password.

Toshiba Office... | Answered on Sep 21, 2020

1.Repair corrupt files
2.Manual booting
3.Reset BIOS
4.Use System File Check san

Toshiba Office... | Answered on Sep 10, 2020

Unplug it once aweek fora rest..itsa computer they need reboot like we need sleep.....cmon man

Toshiba Office... | Answered on Aug 19, 2020

C447 Error - Heater lamp abnormality after abnormality judgment (temperature abnormality at ready status)

Power voltage Check if the power voltage is normal.(Is the voltage during the operation ±10% of the rated voltage?) Thermopiles • Check if the fuser belt center and side thermopiles (front, rear) are installed properly. • Check if the harnesses of the fuser belt center and side thermopiles (front, rear) are open circuited. Power supply unit and fuser unit • Is the fuser unit installed correctly? • Check if the heater lamp is broken. • Check if the connector of the heater lamp is disconnected. • Check if the thermostat is blown • Check if the connectors of the power supply unit are disconnected (power supply unit AC output connector CN408, CN409 and LGC I/F connector CN404 CN405). • Check if the power supply unit is abnormal. LGC board • Check if the connectors CN333, CN345 and CN361 are disconnected. • Check if the conductor pattern on the LGC board is short circuited or open circuited. Status counter After repairing the matter which caused the error [C411/C412], perform the following: • Turn ON the power while [0] and [8] are pressed simultaneously • Key in "2002", then press [START]. • Change the current status counter value "1 " or "2 " to "0", then press [OK] or [INTERRUPT] (to cancel [C411/C412]). • Turn the power OFF and then back ON. Make sure that the equipment enters the normal ready state.
5 Clear the status counter Change the current status counter value (08-2002) "3", "5", "6", "9", "19", "21", "22", "23", "24", "25", "27", "29" or "32" to "0" for [C44X], taking the same procedure as that for [C41X]. * The status counter value is as follows in the following cases. - The error occurred during warming-up: "3", "5" or "6" The error occurred after the equipment has become ready: "7". - The temperature detected by the fuser belt center thermopile is 220°C or higher, the temperature detected by the side thermopile is 230°C or higher or the temperature detected by the front thermopile is 250°C or higher: "9", "19", "21", "22", "23", "25", "27" or "29" - The error occurred during printing: "24" or "25". - The error occurred during energy saving: "27". - A paper jam occurred: "29".

Toshiba Office... | Answered on May 13, 2020

Toshiba e-Studio 356. Description: Power-ON jam: The paper is remaining on the paper transport path when power is turned ON. Remedy: 1 Open the cover of the unit/ area whose picture is blinking on the control panel. ... Yes Remove the paper.

Toshiba Office... | Answered on May 05, 2020

Not finding what you are looking for?
Toshiba E-Studio 356 Multifunction Copier Logo

Popular Tags

33 questions posted

Ask a Question

Usually answered in minutes!

Top Toshiba Office Equipment & Supplies Experts

Timothy Van Der...

Level 2 Expert

152 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6960 Answers

Are you a Toshiba Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Toshiba Office Equipment & Supplies

  • Toshiba Office Equipment & Supplies

Most Popular Question

toshiba e 356 error c440

  • Office Equipment & Supplies