20 Most Recent Kyocera FS-1135MFP w/ Document Feeder Questions & Answers

The Error is described in the Service Manual as - "Zero cross signal error The zero cross signal does not reach the control PWB for specified time."

This can be a damaged wire harness between the High Voltage PCB and another board or a defective Power Source PCB. Bad power at the outlet can also cause this.

Move the machine to another location and make sure nothing else is plugged into the same line. If the problem goes away have an electrician check your wiring.

If the problem still occurs have a Service Technician check the machine and replace the bad part.

Kyocera... | Answered on Feb 27, 2015

If reseating connectors on mainboard do not solve then:
1087 1087 get in to maint.
Choose the 003 line by touching it and activate it.
Reboot when told to.

Kyocera Office... | Answered on Mar 21, 2020


Kyocera Office... | Answered on Mar 19, 2020

laser scan unit cleaning motor error need a trained tech to diagnose why

Kyocera Office... | Answered on Feb 20, 2020

Contact KYOCERA website check for tech support .

Kyocera Office... | Answered on Feb 06, 2020

Not finding what you are looking for?
Kyocera FS-1135MFP w/ Document Feeder Logo

16 questions posted

Ask a Question

Usually answered in minutes!

Top Kyocera Office Equipment & Supplies Experts

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers


Level 3 Expert

1363 Answers


Level 3 Expert

85223 Answers

Are you a Kyocera Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Kyocera Office Equipment & Supplies

  • Kyocera Office Equipment & Supplies

Most Popular Question

error c6400 in 1135

  • Office Equipment & Supplies