20 Most Recent Fujitsu Siemens PlasmaVision P42VHA40 Monitor - Page 2 Questions & Answers

It is probably easiest to talk to your new provider about the problem. They should help you with the settings. Just be aware of your operating system details and describe the problem indicating your system is defaulting to the old provider's mail server and that of course is not working for you.

That said, note the hotliked table below:


Notice in the table you have a smtp setting for O2. I rather suspect that is the setting you are missing.

Just as an aside, here is a bit of info about setting up Outlook.

And lower in the table list first mentioned, you have a smtp setting for yahoo. That may come in handy. But I encourage you to contact your provider.

Fujitsu Siemens... | Answered on Jul 31, 2017

hi hope this helps :-
Fujitsu Siemens Computers Fujitsu Siemens Basic Line 43B1-M Computer Monitor also here is a link for the online manual http://office.manualsonline.com/manuals/mfg/fujitsu_siemens_computers/fujitsu_siemens_basic_line_43b1_s26361k883v150.html?idProd=63836

Fujitsu Siemens... | Answered on Jul 20, 2017

Yes if it's just Bluetooth you're trying to get to work by a new BT dongle. If wireless and BT are on the same card buy a new BT/wireless card This one Desktop 802 11ac Wifi Bluetooth 4 0 Dual band 1300M Wireless AC PCI... Works great. Try to stay away from Intel I had to replace two of them in the last six months. The link above uses Broadcom and works fantastic.

Fujitsu Siemens... | Answered on Jun 28, 2017

Your system might be going into Standby. Check the settings in the Control Panel for Power.

Fujitsu Siemens... | Answered on Jun 22, 2017

try putting keyboard in a different usb port

Fujitsu Siemens... | Answered on Jun 16, 2017

Try to boot from the recovery discs. It might solve your problem.

Fujitsu Siemens... | Answered on May 20, 2017

you can use your pc on mains but there is no surge protection and there is no time to save anything if the mains shuts down
replace the unit with a new one

Fujitsu Siemens... | Answered on Apr 26, 2017

fixya site cannot help with the disc
you may have to use another pc to download the software and then pit it in your unit
however , I think that the problem is the hard drive in your unit has failed
take it to a computer repair shop for a proper diagnosis

Fujitsu Siemens... | Answered on Apr 21, 2017

If you remove the WLAN drivers and LAN drivers, re download the drivers from the manufacturers web site only and then install them.

Fujitsu Siemens... | Answered on Apr 13, 2017

try a different graphics card (and if onboard graphics, try using a graphics card); you may also want to load hdd or raid controller drivers during the OS boot disk load (i.e. don't rely on MS drivers, use the mobo or vendor drivers)

I’m happy to assist further over the phone at https://www.6ya.com/expert/shunter_ccf54e0913bd0501

Fujitsu Siemens... | Answered on Sep 26, 2016

Not finding what you are looking for?
Fujitsu Siemens PlasmaVision P42VHA40 Monitor Logo

11 questions posted

Ask a Question

Usually answered in minutes!

Top Fujitsu Siemens Computers & Internet Experts

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers


Level 3 Expert

13434 Answers

Erni Mallari
Erni Mallari

Level 2 Expert

94 Answers

Are you a Fujitsu Siemens Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

PlasmaVision Fujitsu Siemens

  • PlasmaVision Fujitsu Siemens

Most Popular Question

our cable box

  • Computers & Internet