Dell 1503FP 15" LCD Monitor - Page 9 - Answered Questions & Fixed issues

Restart the laptop and after the dell logo appears then disappears press the f8 key repeatedly until you see the "Advanced Boot Options" menu. Then highlight "Repair your computer" and press enter.

http://downloads.dell.com/manuals/all-products/esuprt_laptop/esuprt_latitude_laptop/latitude-e4200_service%20manual_en-us.pdf

first post what PC you own. or ask dell.com

First thing to do is make sure all the RAM and other connections are good and try again. IF the issue persists, take things out, remove everything but the monitor and see if you can see the POST screen, then power it off and put in the RAM and try again, then do the hard disk etc, You may be able to narrow it down that way.

What color(s) is (are) the blinking light? Is the blink a simple on/off or is there a pattern to the blinks (long/short)? Do any other lights come on and blink? (These could be on the keyboard or the battery health indicator LED.) If the light that is blinking amber or orange indicates that the system has failed the Power On Self-Test (POST). If the blinking light is white, the system is in sleep mode. Try disconnecting the power adapter. Take out the battery and remove all external peripherals. Press and hold the power button for 20-30 seconds to discharge the system's capacitors. Try to restart the machine with only the battery and AC adapter. Did the behavior change? You can remove memory and the hard drive to check if those are causing a POST failure. Reinstall one memory stick at a time if you have a pair or more. If you can get to the Dell splash screen, try pressing F12 to launch the diagnostics. (You may have to press the key repeatedly starting from a cold boot.) If the blinking light is alternating orange and white, then you could have a problem with the motherboard, battery or AC charging system. Since you believe that the battery and adapter are OK, then the problem would likely be the motherboard has been damaged. The damage could be at the connection for the charger or somewhere else. I hope this helps. Cindy Wells

replace the RTC coin cell batter if over 5- 7 years. old. It is that old, so...test the HDD fully .using a smart test app. data is a whole other matterplug the hdd into a HDD docking bay (buy one)it uses USB port.the pull the data off using any other windows based computer that works.works if lucky bad HDD have bad sectors now and now data is corrupted, the amount of uncorrupted data is not known by anyone on earth , only you, know that doing the work stated. looking and trying to copy data. can work and millions have every day. www.it's like saying my house was flooded, in a hurricane.what things in my home my be still good.?answer only you can look and see.that is why others asked can not answer any question like that. dell or any other person sitting in a text box 12,000 miles away.the cure is new hDD, new OS loaded.data recovery is process endlessly discussed in vast places on earth, google finds millions.42million hits. today.https://lmgtfy.com/?q=how+to+recover+data+off+bad+hdd&iie=1good luck finding data. if the motor is dead there will be no data.

Press Ctrl-P while booting up Management Engine will open use 'admin' as the password you are required to set up a new p/w, do it. It will prompt and say if you do it will reset, that's what is required! then exit, once it restarts, the error message disappears!! now you can install OS as usual

1-3-1 through 2-4-4 DIMMs not being properly identified or used need remove all ram and insert one at a time

Larry NG and JonSnell are right, so you have few options. One method is to try as many passwords as you can think of, since unfortunately, many people re-use the same passwords for different purposes. The Dell website has a Contact option for help, but as they advised you here already, that may not give you a good option. They may want to know more information than you provided here. What model Dell is it, for example? https://www.dell.com/support/incidents-online/en-us/contactus/Dynamic

You can use Kernel for Outlook PST Repair Tool to repair your damaged Outlook pst file successfully. Go to http://www.pstfix.com to download the tool and refer to http://www.pst.msoutlookrepair.com to know more about the pst recovery.

was it like when purchased?return if it was

You will need to go to customer care it will be great if your device still has warranty.

http://www.nsf.repair/ NSF Repair Kit is an end-to-end solution for the problem of corrupted Lotus Notes files of the NSF format. This Lotus Notes NSF repair tool uses a uniquely efficient proprietary file analysis core and a number of advanced algorithms to open files with any degree of damage and successfully extract their contents.

Hi Tushar, My name is Pradeep and I work for Dell's Social Media Team. Please disconnect external devices and try running the application. Please update video and chipset driver. The video card on the system might not support DirectX 11.2 which is included in Windows 8.1. Please download DirectX 11.1 using the link: https://support.microsoft.com/en-gb/kb/179113/en-us Pradeep Lokesh Social Media and Community Professional Order Status: http://del.ly/61822hij Download Drivers: http://del.ly/61832hid

besides the non standard dells, BTX junk yours is only old ATX. yours is very old. with PATA power supply. ,Optiplex. and the very old 20pin power plug, not 24. 2003 year, 17 years old. yellow is +12v. and red is +5vd black is common ground. the 20 pin is like this. for sure. this is in the wiki, under PSU standard spec. for sure. on beanh jump pin 13 to 14 and it turns on. no videos needed, all this is in the wiki.

System board Regulator Failure A power failure has been detected in one of the onboard system board regulators. This could be caused by a failed system board component or by a plug-in device creating a short on a regulated power rail. (PS_ON asserted, PS_PWRGOOD asserted, SYS_PWRGOOD de-asserted) http://www.dell.com/support/article/us/en/4/SLN288786 Personally, the first thing I would do is a visual inspection of your capacitors. They are the barrel shaped things on you motherboard. The tops of them should be flat, if they are bulging or leaking, they are bad. http://s1030.photobucket.com/user/amesghali/media/leaking-dell-capacitors.jpg.html I find bad capacitors to be the main problem with MB failures. If you are feeling adventurous you can replace the capacitors but there is no guarantee there are no additional problems. Where To Buy Capacitors Online

PC came new with W10-64bit.you meant just exactly after the upgrade it failed.right, you meant the UPGRADE (from what?) failed hard.that error means the boot files are corrupted.easy if HDD bad. test it.is the HDD good? did you use secure boot or legacy boot to do that,?There are lots of possible cures. here.one is to ask dell for help on there forum.they can tell you how the original OS was set up.and they also have your drivers.no clues.

Are we the ones who's gonna tell you where spring has went ?Tutuapp

Hi,
You can download/ install Media Player Classic
Download the latest version of Media Player Classic (K-Lite Codec) FOR FREE
It is a small but a very fine Media Player which also installs all the required CODEC and you can play all audio - video files.

Hope it helps! Good Luck! Thanks for using Fixya!
CreativeTECH

no model stated, at all, must be old no? laptop from 2000 to now. vast ,please tell what PC this is, REAL models matter. https://en.wikipedia.org/wiki/Dell_Inspiron_laptops AC power pack removed. step 1, remove the old huge battery first and with AC pack back and connected , run the PC now.? on AC power only? yes, good. battery is bad if not the AC pack can be bad, a cheap fix that. No cure,? the RTC coin cell battery deep inside is bad. yes cured, great, no cure, then remove RAM sticks and reseat them. cured now? the beep means hard fault, there are up to 20 things inside that can fail. the 20 steps are here. https://www.pcdied.com/intel-magic/Powerbrain-LT/power-dead1.html#The_strip_down_test_is_next