20 Most Recent
Dell UltraSharp 1907FP 19" LCD Monitor - Page 3 Questions & Answers
HI, I have a
Hello :
Check this link for manual : http://safemanuals.com/user-guide-instructions-owner-manual/DELL/LATITUDE%20LT-_E
and this link : http://safemanuals.com/annexe_Software%20Guide_DELL_LATITUDE%20LT-_E.htm
good luck .
rate if useful please !
My monitor is not showing red colors? how do i fix
There is a number of possible reasons why your monitor lost the red color. A good guess, however, is a broken cable or connector. Check the plug and socket of the cable for bend or broken pins. If everything looks OK, try to change for a different cable.
If the problem persists, a pin of the connector soldered to the PCB internally may be broken. This is an easy repair for a service technician but I really recommend you do not do it yourself.
I do not know how to make my dell monitor usb
- Check that your monitor is turned ON.
- Reconnect the upstream
cable to your computer.
- Reconnect the USB peripherals (downstream
connector).
- Switch off and then turn on the monitor again.
My screen develops some ghost images after powered
well you are correct and when it come's with the lcd monitors it is known that when a pixel is subjected to same amount of charge for a long time it might retain the residue of charge even after the amount is changed so this reason why you get this problem and in order tackle this just try to use some changing screen savers or just turn the monitor switch off while you are not around it.
good luck.
Monitor Problem
lower right hand side are some monitor setting buttons.
They should let you configure your brightness and contrast,also sharpness.
One button may do an auto fix.
Also in your win control panel click on display, advanced. and set your resolution until your happy with the picture.
Where can I find an on/off switch for my Dell
sholmes, Try Digikey.com or Mouser electronics. You WILL match it up exactly and may need to do some tricky "unsoldering" and "soldering". Good luck! YOU'RE on your OWN. 12fixlouie.
Dell LCD power up issue
Hi,
I suggets you try your Monitor with another pc and see if its behaving the same if the same then the monitor is bad
Now if there is change ie its showing on the other PC then your pc VGA card is faulty or is not seated correctly on its slot pls check this,
Also swap VGA cards this how you will know its status .
Last get another VGA card
Good luck
DELL 1907FP MONITOR
There were no screws on the back of my monitor so that was not an option for me. I figured I didn't have much to lose, so I took a very thin and small
screw driver and pried the on-off button right out of its socket, which
does break it. To the left, inside the hole,you can see where a tab on
the button pressed against a small circular inner button. I pressed
that with the screwdriver and the monitor turned right on. I replaced
the button for the sake of cosmetics and will never touch it again. If
I leave the monitor for any extendd period of time I will simply unplug
it.
How to remove "no composite inpute signal"
If you have the same problem with both monitors, it sounds like a display card setting or problem.
The chances of you having the same problem with different units is 1- 50.
Try the monitors on a different PC and get back to me.
Just won't power on
This must have encountered rusting or jamming. Service must be called to open monitor frame.
Resolution wont resize properly
Try resetting your monitor to the factory settings. If that doesnt work I suggest you unistall your monitor in device manager Only if you have the monitor cd. If you do not have a cd to your monitor you can always download on the internet. These two options should help you but if they dont go ahead and come back and repost your question.
Power Button Broken?
Yes, I think your right, if it is under warranty send it back to Dell for repair, I had the same issue about a year ago.
Not finding what you are looking for?