Sony Handycam DCR-HC36 Mini DV Digital Camcorder - Answered Questions & Fixed issues

you may have the picture package software try this site:

http://www.ppackage.com/e/download.html

click on the next icon on picture package 1.8 then download and install.

Option 1:

If you want to use the USB cable to connect the Camcorder to the Computer to transfer the video to the Computer then:

(Applicable for Vista Operating System Only.)

This Camcorder does not support USB streaming with the VISTA Operating System. Use an i.LINK cable to transfer the video to the Computer. The i.LINK port is also called IEEE 1394 or Firewire port. (An i.LINK is a black D shaped connector with 4 or 6 pins. The type of cable to be used will depend on the i.LINK port of your Computer. The Sony Camcorder will have the 4 pin i.LINK cable and if the computer has the 6 pin i.LINK port, then you may have to use the 4 pin to 6 pin i.LINK Cable).

You can use any video capturing software like Windows Movie Maker to transfer the video from the Camcorder to the Computer.

Refer this Link for the instruction to transfer the video to the Computer using i.LINK cable.

http://www.kb.sony.com/selfservice/documentLink.do?externalId=C111893

NOTE: As the Camcorder does not support USB streaming with Vista, it is not required to use any Sony Device Driver to transfer the video to the Computer. You do not require any Drivers or Software from Sony to transfer the video from the Camcorder to the Computer using the i.LINK/Firewire interface.

Option 2:

(Applicable for Windows XP Operating System only):

If you are using a Windows XP Operating System then you have to install the USB Streaming Driver in the Computer from the supplied Software disk with the Computer.

Check this Link for the instruction to transfer video to a Computer using USB Streaming.

http://www.kb.sony.com/selfservice/documentLink.do?externalId=C222820

If you do not have the supplied Software disk then I suggest that you use the i.LINK cable to transfer the video.

Or you can purchase the software disk from this link:

https://servicesales.sel.sony.com/ecom/accessories/web/productSearch.do?searchOperation=partSearch&searchText=266675501

NOTE: Since the original supplied software is not available for free download now.


Good Luck!!!!!!!!!!!!

i am unable to import videos from my mini dv digital handycam to my laptop with vista as operating system.is a i-link cable required or usb cable will do? i have the picture motion software and import from handycam software dowloaded through net. can u help me out???

You may download Sony software and drivers here if you want to skip buying the CD.

This is usually caused by an oxidized, misaligned or defective Audio/Video drum. You can try running a cleaning tape through the camera. If this does not solve the problem the camera will need to be serviced by a qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

This is due to the fact that the safety tab on the tape is not present or is switched to lock . This is to prevent accidental recording on the tape. However if you had tried with a new tape and the fault seems to come then the fault can be that the trigger switch on this detector circuit is shorted or is accidently pressed to be ON. You can remove the tape cover and check this switch , if not there is fault on the controller section .

This is usually caused by a defective component in the tape detection circuitry and can usually be repaired fairly inexpensively. However, it's not a user serviceable problem and will need to be repaired qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

Hi Poohammn,

Please follow the below instructions :-

Download the file USB Drven from the below link and then install it.

http://esupport.sony.com/perl/swu-do...2&PASSVAL2=SMB

This will extract, and create a folder on the computer desktop named Sony-usb , or anything as per your choice

Open this folder , and open the setup icon.
Complete the install and now the USB driver will copy to the computer.

After the installation you would have to restart the computer and it would work fine.

Hope this helps ..:)

You should not need additional drivers if you have Windows Movie Maker on your machine, it's standard kit for Vista.
Connect with a firewire cable and open WMM and capture from the tape. Firewire is also known as iLink or IEEE1394a.

You can easily download the driver for Windows 7 from HERE

I hope I helped you!

Tthe most likely cause for this is a faulty record safety switch in the cameras tape mechanism. This can be repaired fairly inexpensively. However, it's not a user serviceable problem and will need to be repaired by a qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com.

jvc gr-d350as driver

hi i have a jvc handycam gr-d350as but i have not driver disc. so i couldn't connect with my windows7 laptop,plz can u help me..thanx

Hi, kindly get the best driver for your convenience here :www.sony.co.id/section/downloads
www.givemefile.net > ... > Digital camera > SONY
www.ps2netdrivers.net/driver/sony.dcr-trv480e/

esupport.sony.com/US/perl/swu-list.pl?mdl=DCRTRV22

www.userdrivers.com > Camcorder > Sony

Jay__GTG

Hi, kindly get the best driver for your handycam here :
www.givemefile.net > ... > Digital camera > SONY
www.ps2netdrivers.net/driver/sony.dcr-trv480e/

esupport.sony.com/US/perl/swu-list.pl?mdl=DCRTRV22
www.userdrivers.com > Camcorder > Sony
Best regards, Jay__GT

Hello, kindly get it here :
www.sony.com/
www.brothersoft.com/.../sony-handycam-software.html
www.userdrivers.com > Camcorder
J___

Please get it here : www.vierstra.com/.../download-sony-dvd-handycam-usb-driver/

There is a Sony how-to-transfer page for this camera, with a link to obtain (purchase) a new CD, at THIS LINK

You don't say what type of connection you are trying to use. This type of camera usually downloads better with a Firewire (DV) connection. Some mini-DV cameras only use the USB connection (if they have one) for stills and can only download video by Firewire. This is because you have to play the tape into the computer, not just copy a file. The way it works on my computer, the camera is controlled by the computer software through the Firewire cable. Confusingly, Sony call Firewire "i.Link".

Most PCs have a USB port, but no Firewire port. Macs often have a Firewire port but may not have USB. As most Windows PCs do not come with this interface, you might need to fit an add-on Firewire interface card. This will come with a driver for the card. If you have a MAC, you may already have a port.

Suitable Firewire (DV) cables can easily be found on Amazon or eBay. You will need the kind with a small (four pin) connector at one end and a larger (six pin) connector at the other. My camera came with the correct lead.

Hi,

This solution is only applicable for the selected camcorder models. You can follow the steps mentioned below for the DCRHC36 models.

• Turn on the computer.
• On the computer, install the USB driver from the CD-ROM supplied with the camcorder.

Only the USB driver included on the supplied CD-ROM will properly enable the camcorder for USB streaming. The USB Streaming Driver can only be installed from the supplied Software CD.

• Turn the camcorder on to the PLAY/EDIT mode.
• Turn on the USB streaming feature in the camcorder menu. P-MENU? PICT.APPLI.Menu? USB SELECT? STREAM
• Connect the USB cable to the camcorder.
• Connect the other end of the USB cable to the computer.
• Cue the video to the beginning of the video footage to be transferred.
• Start the video capture software on the computer. You can try Software like Windows Movie Maker

o NOTE: The computer must have compatible video capture software to complete this procedure. Many video editing software applications include a capture function. If you have video editing software, you might not need a separate video capture application.

• Begin playing the recorded video in the camcorder.
• Begin importing the recorded video with the capture software.

Good Luck

FixYa

Tape mechanism problems are quite complicated but they can usually be repaired fairly inexpensively. However, it's not a user serviceable problem and will need to be diagnosed by a qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .