20 Most Recent
Panasonic DMR-ES40VS VHS / DVD Recorder Silver - Page 7 Questions & Answers
Panasonic TC-P50u50 went out. Is it the power supply or something else
Something short circuit in the SMPS [power] section circuit, and the pop you heard might be of a blow out fuse. It will be best to contact any service technician. If you wish to get some details; check the sites linked here.
Faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault. Search the site by type in the Brand Name of your set, in its search bar at the right side column, and press enter. See it in by Webview with mobile or by desktop. Mobile View has no search box. Screen-shots to defective LCD panels are given. You can see and compare to that to your TVs', and can make sure about the fault to an extent.
9/24/2021 12:36:21 PM •
on Sep 24, 2021
Panasonic TV flashing LED
Buy a new TV this set most likely isn't worth fixing, plasma sets are much more complex than LED or LCD sets, also boards are hard to find and expensive
9/18/2021 11:16:01 PM •
on Sep 18, 2021
Panasonic tx-48cx400b TV turns off when I connect my Ps4 through hdmi cable. Can anyone help?
www.amazon.co.uk > ... > TVs
Amazon.com, Inc.Buy Panasonic TX-48CX400B 4K UHD 48 Inch TV (2015 Model) at Amazon UK. ...PRO GOLD RED HDMI v2.0/1.4a HDMI Cable 3D 2160p PS4 SKY HD 4K Ultra HD ...This tv offers excellent picture quality through HD sources and Netflix HD and ... TVand PC are both connected to my network switch with Ethernet cables).
PanasonicExplore the Panasonic TX-48CX400B - LED - Uncompromising 4K picture quality is yours with this 4K Ultra HD LED TV featuring an HDMI 2.0 terminal. ... Many describe the 4K effect as feeling more like looking through a window than watching ... Simplyhook up your various devices - such as a Blu-ray recorder or the latest ...Missing: turns ps4
9/6/2021 3:45:26 AM •
on Sep 06, 2021
I NEED REMOTE CODES FOR A PANASONIC PLASMA 50 TV
FOLLOW THE BELLOW INSTRUCTION
- Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.
- With the button lit, point the remote at the TV and enter the TV's 3, 4, or 5 digit code.
- Verify by pressing the VOLUME + button. ...
- Press the TV button to store the 3, 4, or 5 digit code.
7/2/2021 10:04:47 AM •
on Jul 02, 2021
I have panasonic tv model: th-l 32c20r. It does not power up.
Fault with the main power supply regulator board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts.
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.
Search the site by type in the brand name of your set, in its search bar at the right side column, and press enter. See it in Webview by mobile. Mobile View has no search box.
7/1/2021 5:58:06 AM •
on Jul 01, 2021
Not finding what you are looking for?