20 Most Recent
Panasonic DMR-ES40VS VHS / DVD Recorder Silver - Page 3 Questions & Answers
My Panasonic 42 plasma turns on then off
Plasma TV sets are impossible to get parts for. The problem that you are describing could be many things but the most likey is failing capacitors in the power supply
11/4/2022 1:34:27 AM •
Panasonic...
•
Answered
on Nov 04, 2022
I have a anko big button remote and I'm trying to pair to a Panasonic plasma modelTH-42px8a I need codes thanks
These are for a Universal Remote. They might work. If not please add the remote manufactuer and model # to comments.
NEC TV 070 130 134 040 056 007 019 024 004 213
NEC VCR 012 023 043 048 039
Good luck,
Techjoel
OR
Turn on your TV.
On your Tune In remote, press TV and release.
Press and hold Set until the green light on Tune In blinks once, pauses and then blinks twice. Now release the Set key.
Enter the first three-digit TV code for your NEC from the list which follows:
030, 056, 019
These codes are listed in order of popularity, and the green light will blink twice if you perform this procedure correctly.
Aim Tune In at your TV and press Power. Your TV should turn off. If it does not, repeat steps 2-5, trying each code listed in step 4 until you find the one that operates your TV.
Now Test Your TVWhy test? Many times more than one code appears to work. Testing is desirable to be sure you have the correct code for your TV or the other devices you are setting up.
Press the Power key to turn on the TV, then press mute, channel scan ("CH") and volume ("VOL") keys. Tune channels 7 and 11 by entering the number followed by the Enter key.
If your TV does not pass the test, return to Step 2 at the top of this page. Enter the next three-digit code and repeat the process.
10/6/2022 6:39:33 PM •
Panasonic...
•
Answered
on Oct 06, 2022
How can I use my GE JC012 Universal Remote to control my Panasonic PV-D4744S ?
003, 054, 055, 062, 070, 148, 149, 170, 171, 374, 381, 437
https://www.directutor.com/content/New_3_digit_codes_GE_Universal_remote_TV
9/29/2022 7:02:02 PM •
Panasonic...
•
Answered
on Sep 29, 2022
TH-P50V20A panasonic Viera remote codes
have you tried all these with the remote?
13833 18250 14039 15716 19503 12362 14333 12055 15532 15355 19617 15659 10508 16940 17845 12001 10916 14912 16513 18310 18810 11520 17127 17731 18649 18029 14852
9/18/2022 4:34:56 PM •
Panasonic...
•
Answered
on Sep 18, 2022
Panasonic tc-p55st60 7 blinks of red light.. replaced TNPA5764 and TNPA5717... no change
what next?
Normally when the screen is blank and the power indicator is blinking, it means the TV is in the shutdown mode to protect itself. Try unplugging it for several minutes. This will give the system time to cool down and also reset itself. While it is unplugged make sure there is nothing blocking the vents and clear them of dust and debris. Use a non-abrasive cloth. (You can dampen the cloth with water, but do not use any chemical cleaners.) You can also use a can of compressed air made for electronics to help clear the vents.
If this doesn't clear up the problem, then what you read about the SU and/or SD board is most likely the issue. The number of times the power indicator light blinks in a sequence identifies for the technician what parts to test. I have included the chart for you.
Because of the high voltage parts in the TV, unless you have done this type of repair before, I recommend having a technician diagnose and complete the repair. If You Need An Expert 6ya.com
Best, Donald Deane MCSE,ASE,CPO
9/17/2022 12:24:45 AM •
Panasonic...
•
Answered
on Sep 17, 2022
Not finding what you are looking for?
