20 Most Recent
Bosch 24 in. SHE44C05UC Stainless Steel Built-in Dishwasher - Page 4 Questions & Answers
Bosch dishwasher. When running, can see water flow down overflow channel to pan at bottom of machine.
If you can see water flowing down the overflow channel to the pan at the bottom of your Bosch dishwasher while it is running, this indicates that there may be a problem with the dishwasher's float switch or water inlet valve.
The float switch is a small device located at the bottom of the dishwasher's tub that is designed to detect the water level inside the dishwasher. If the water level rises too high, the float switch will shut off the water inlet valve to prevent the dishwasher from overflowing. If the float switch is not functioning properly, it may allow water to continue to flow into the dishwasher, resulting in water flowing down the overflow channel to the pan at the bottom.
Another possible cause of this issue could be a faulty water inlet valve. The water inlet valve is responsible for regulating the flow of water into the dishwasher. If the valve is stuck open or is not functioning properly, it may allow water to continue to flow into the dishwasher, resulting in water flowing down the overflow channel to the pan at the bottom.
To resolve this issue, you may need to have a professional technician inspect and repair your Bosch dishwasher. They can test the float switch and water inlet valve to determine the cause of the problem and replace any faulty components as needed.
2/24/2023 2:19:56 PM •
Bosch...
•
Answered
on Feb 24, 2023
Where can get a replacements clic assembly for my Bosch 1587vs
You can find a replacement clic assembly for your Bosch 1587vs jigsaw online from Bosch or from third-party retailers. You can also find clic assemblies from hardware stores, home improvement stores, or tool supply stores in your local area. Make sure you get the correct clic assembly for your Bosch jigsaw model.
2/4/2023 6:02:21 AM •
Bosch...
•
Answered
on Feb 04, 2023
My Bosch dishwasher has a E15 Error.
This is a flood sensor issue rather than a float switch issue. The sensor is in the tray and senses water from dripping hoses or worn pump seals. It doesn't need much water as the sensor is at the lowest point, so it only needs a teaspoon of water. you can check the connections at sensor end and follow it to the control board connector.
My Bosch Dishwasher is displaying an error code E15, what does it mean? An E15 error code indicates that the safety switch has detected water in the base of the dishwasher
. Your leakage protection system has activated.
Videos as well with fixes
https://www.google.com/search?q=bosch+dishwasher+has+a+E15
..
8/21/2022 5:11:35 PM •
Bosch...
•
Answered
on Aug 21, 2022
Bosch Dishwasher E01 Code
Two different ideas from Bosch, either control board or heater element, temperature thermistor. As it fails at the rinse stage where the water is hotter, I would check the latter, or just call for service and get it correctly diagnosed and fixed. If you want to try some things, check connections to the main control board and to the heating components.
https://www.google.com/search?q=Bosch+Dishwasher+E01+Code
..
6/7/2022 5:52:54 PM •
Bosch...
•
Answered
on Jun 07, 2022
Doorlatch accidentally locked on open door of Bosch dishwasher model shp65t55uc/02
Here is how to solve this problem. With the door open take a flat screwdriver and pull the small gray latch towards you until it snaps into the open position. There is no electrical connections to this part. It is totally manual. If the small u-shaped trigger is missing then a new part is needed. See the photo below.
6/1/2022 1:45:53 AM •
Bosch...
•
Answered
on Jun 01, 2022
Bosch dishwasher intermittently not completing cycle, not draining
it maybe something as simple as the door opening during the cycle - thus pausing the machine - this can happen when the machines with plastic tubs get hot - the top of the machine flexs a bit and the latch disengages and the machine stops. Next time it does it just try to push the door closed and hit start and see if it picks up where it left off. A stiffener is needed to repair the fault - but we have fixed with shims in a pinch - between the counter top and the dishwasher to minimize the flex
5/19/2022 1:09:50 PM •
Bosch...
•
Answered
on May 19, 2022
Not finding what you are looking for?