20 Most Recent
Panasonic VIERA TH-65PV500 65 in. Plasma Television - Page 5 Questions & Answers
We have a 50"panasonic vierra
Tv have problems with it 2 backlight buffer boards,like to help the tv Plasma screen panel to stay consistantly lite with same brightness.Take ur tv back where u bough it.Trade it in for another tv this tv have deffective and dying backlight buffer boards.
Panasonic viera tv won't turn
Hello
The problem of your television is cause of faulty power supply.The power supply have abnormal voltage output supply because of leak capacitor.If you want to fix the problem of your TV,this is the procedure,First is remove the back cover and find the power supply.You can see the bulging tops of capacitors,thats the leak capacitor.Replace all new capacitor with the same value.Avoid short circuit in PCB board of power supply.If you can't do the to repair, call a technician or repair to authorized service center.Thanks..
Hdmi port1 not working trying
Check input with other known good source. If still not working replaced the main board. panasonic call it the A board.
For internet apps (like Netflix
Must go into the tv Menu go to OPTION go down and pick VARIABLE setting for output for extrenal speaker system.It should not setup on Menu OPTION setting on FIX setting,tv will used tv speakers system only.
I have a panasonic vierra
Hello
Its video out card has the trouble. Video out section has an IC which controls the plasma screen pixels. This card is responsible for variable brightness as well as contrast; in fact, control over picture on the seceen. There are two possible faults can be occur to this section. The first one is supply voltage variation to the board. The second one is IC trouble itself. There is no replacement option to this IC; as it is machine pressed. Only card replacement can be done. If so, there are so many service mode adjustments to be done with this after card replacement. To check the supply voltage vairation too; good quality multimeter with frequency counting facility is needed. In fact, this is not a user repairable one. Get it repaired by any well experienced service technican, or by authorised service center for Panasonic. OK.
My panasonic tv light continues
this indicate an overload in the power supply..... ther some leacky caps. or regulator on it. quilified technician can only indentify it.
When watching fast moving action
the VIERA TH-65PV500 has a lower refresh rate than most lcd and led tv's which will cause some ghost images to appear on fast moving images and can not be fixed
I have the panasonic viera
Hi Robert,
Blinking error code has an specific corresponding parts malfunction.
4-10 blinking error indicated a malfunction to P-Board(power supply) and to A-Board(Main Board).
It is better to be specific on how many times does the led light blink to determine the exact caused of the fault but for sure now that the fault came from either P-board and/or A-board.
Since the unit is only 2 months old, it is under warranty period. I would advice you to avail it because the manufacturer will fix it for free. Don't attempt to open the back cover because it will void the warranty.
Hope I helped you.
Have a nice day!
Thanks for using Fixya.
TC-P50GT25 Viera has no audio
In that case all you can do is connect each device you're connecting to the television to the surround sound. You would connect the device to the television for video only and connect the sound cables to the surround sound. You may also be able to connect the devices directly to the surround sound (video and audio) and then connect it to one of the television's inputs.
I have a Panasonic Viera
This is a common problem an a failry easy DIY fix.
Plasma and LCD TV sets are prone to having capacitors in the power supply section fail. This is the most likely cause for the probem you describe. When capacitors fail your will commonly see one or more of the following symptoms.
- No video, Power light is on or blinking.
- TV is making a clicking noise.
- TV takes a while to come on
- Screen is very dim or flickers.
Again, You can get a power supply repair kit with the parts, detailed instructions, and support from sites such as www.TvRepairKits.com . Or just click here to see more details on their kit.
Here are pictures of capacitors...Notice that the ones below look bloated. They have failed and will need to be repalced.
Capacitor being replaced! Fairly easy DIY fix.
Again, You can get a power supply repair kit with the parts, detailed instructions, and support from sites such as www.TvRepairKits.com . Or just click here to see more details on their kit.
.
I have the 50 inch
Hi, one of three boards are the culprits. SC, SU and SD boards. (Y sus and the drivers). Possibly but very very rare, the panel could have blown those boards out.
My viera keeps switching itself
This may sound silly but do you have anything like a jukebox with neons, novelty lighting, plasma ball or even low energy lighting without a shade or diffuser on it? these can have strange effects on some IR control systems (my cable box used to do strange, random things and when the engineer came out to look at it, he told us to put a shade on the light and turn off the plasma ball and the weirdness stopped!)
Hope this helps.
Not finding what you are looking for?