20 Most Recent Panasonic DMRES15 DVD Recorder - Page 2 Questions & Answers

When start burn dvd's on the PC open setup page select correct file what kind format do you want a copy.

Troubleshooting Solution 1.Display Message " Please wait" Not booted2.DVD-Rom Two-Three times make noise but doesnt spinning3. Doesn't open tray, No video OUT 1.Bad Main Board VEP791172. Bad DVDROM3. Bad Prosessor PCB

We have parts please check our weblink: avsystemparts

May be we can help you check our link: avsystemparts

I have the same problem. System displays 00000, then goes to 12:00am, then flashes U61...please help

Hello, I had the same problem and after spending a few hours reading and trying things, I found a solution. Its very simple. Power on your unit (manually) and then on your remote control push and hold at the same time"enter" and the number "1" while pointing directly to your unit and this should solve the problem. Good luck.

The lazer in it will not read certain type of disc,s,

Yellow is composite video, the red and white are audioBlue, green and while are component connections (in US white would be red)

Dear FixYa
Thank you for your support. I have solved the problem on my DVD Recorder by reading other peoples solutions to this problem. My DVD display was showing DVD3 and all buttons would not work. So on the handset I pressed the ENTER/OK button and no. 3 button together for a few seconds, this cleared DVD3. I was so pleased that this worked. croneruk, 6/10/2008

Make a factory reset to this set. It it do not help you, seek tech support.

Press enter and 1 on the r/c together for more than 3secs

• Hi, I can help.

• somehow your DVD recorder and the remote are using different codes. So you just want to get them both on "code 1."

• To do this press and hold the "ENTER" and "1" buttons on the remote for 5 seconds and your remote and DVD recorder with both operate on code 1. At this point your remote will again work as normally.

• If you have any comment please feel free to leave them here.
• Hope this helps and thank you for using FixYa.

Regards, Tony

This machine will only accept DVD-RAM & DVD-R Discs.

All other formats of Recordable DVD will be rejected for either Recording or Playback.


Please leave feedback.

Cheers

Andy

It is not possible to tune in 7two, channel 11, GO! or similar digital channels with this model DVD recorder, as its tuner would most likely be analogue only. You would either need to upgrade to a model with a digital tuner built in, or purchase an external set top box, capable of SD and HD digital reception, and connect its AV outputs to the respective inputs of the recorder, in order to record the channels you want.

However, being in OZ, those digital channels are available as free to air - all you would need is the appropriate receiver to enjoy them. I recommend a set top box which offers HD as well as SD.

this is fixable. All you need to do is go to any store like wal mart, futureshop, best buy and find a CD cleaner. It is a CD with a little cloth fibers on one part. this will clean the laser of your DVD recorder and make it work again.

Sometimes dust gets on the laser and makes it not work.

You can either copy and paste the following link into your browser, for quick-view, and/or save the .pdf document (instructions for Panasonic DMR-ES15 DVD recorder):

http://videolinq.tafe.net/attached_docs/pdf/equipment/Panasonic_DMR-ES15_User_Manual.pdf

(verified and complete to give you a basic operation manual for FREE download)

or you can try to set the clock manually, do this:

press [FUNCTIONS] on the remote while unit is on, to bring up the setup menu, scroll to 'OTHERS' look for 'CLOCK' or 'CLOCK SET' option, highlight it, click it, set the clock. Press [ENTER/OK] to access the date hour minute, etc., then press the relevant remote arrow buttons to select correct time/date, then press [ENTER/OK] to store the current setting. Then press [RETURN] to exit the setup. Clock is now set (this model does not offer automatic clock adjustment for daylight saving).

If the above suggestion does not work, download the pdf and save it for accurate reference. Either may help you.

You can try this simple idea; to re-code the remote to your unit, press and hold 1 and ENTER/OK buttons together for 5 - 10 seconds, then release. This should restore the remote command to match the unit, and thus the remote should work. Failing that, replace the batteries in the remote with new ones, and repeat the above suggested procedure.

If the remote is triggering 'SET 1' on the unit's display, this simply means the remote code is different to the unit, and hence the remote requires a reset to restore control to it whenever the batteries are replaced. Easy enough to fix, doesn't take very long, and should not cost anything except some new batteries if required.