20 Most Recent
Cuisinart BFP-703 Blender Questions & Answers
My blender seems to have locked up, I would like to replace it, how do I do that?
It depends on whether or not you have a manufacturer's warranty on it and if it's still under that warranty.If so, there should be contact information on the warranty card it usually comes with and steps on how to arrange for a replacement.Otherwise, you may have to go into the place of purchase and buy a new one, unless you know someone that can repair blenders having issues like this.
5/5/2012 7:54:38 PM •
Cuisinart...
•
Answered
on May 05, 2012
The bottom gear on my
Hello, maridI was trying to help you out here. Maybe this will help some? I was going backto some customers that asked questions in the recent past and even fartherback. It appeared that no one answeredsome of them, So, I thought I would take some of my personal time to see if Ican help. Even though this Informational site may not have your exact model orbrand, this site will help you a lot. Here is a site link about everything you want to know about blenders andpossibly yours, from repair to trouble shooting it. http://home.howstuffworks.com/how-to-repair-small-appliances5.htmPlease if this helped you at all, if you can find the time and in your heart torate my help and some kind words written would be appreciated for my free help, I would appreciate it. Here is also my direct link to my own pages of other areas of my expertise forother problems you might have in Automotive, Appliance, and Electronics. DropIn anytime for my help.Thanks, Mikehttp://beta.fixya.com/users/mc1bean
10/28/2011 10:26:06 PM •
Cuisinart...
•
Answered
on Oct 28, 2011
The rotor on the base for the food processor will
Usuallt, it is simple - you have the position the gear box of the food processor side until there is no gap between the gear box and the teeth on the base - this usually takes me a few tries to get it right.
If you are confident that there is no gap, call Cuisinart and see about getting a new gear box - 1-800-726-0190
9/29/2009 7:28:32 AM •
Cuisinart...
•
Answered
on Sep 29, 2009
Attaching top container to bottom tub.
Place food processor attachment on base
Put work bowl on gear collar with left slot just to the left of the tab on left side, slide until tabs click
Place work bowl lid on top of workbowl with tabs slightly to left of work bowl handle - slide into place until it clicks
12/12/2008 7:15:05 AM •
Cuisinart...
•
Answered
on Dec 12, 2008
Broken gear on BFP-703 base
The drive is replacable and available from Cuisinart, you will have to sign a waver to get the part. the drive is screwed onto the motor shaft with reverse threads. the plastic drive will have to be completely broken off of the unit to expose a brass"nut" which was internal to the drive. depending upon your model you may have to remove the lower half of the base unit to access the lower part of the motor shaft. there will be a slot in the end of the shaft for a large flat blade screwdriver. this is used to hold the shaft still while turning the drive "nut" with a vice grip pliar or similar. the new drive is just threaded onto the shaft and normal operation tightens it.
10/19/2008 9:33:20 PM •
Cuisinart...
•
Answered
on Oct 19, 2008
Not finding what you are looking for?