Top 20 Panasonic CQ-VD7003U Car DVD Player Questions & Answers

do you have an after market radio? If so, does it have rca inputs? If not you will need to get long rca jacks and purchase an rf converter so that you can connect throught the antenna.

Panasonic... | 44 views | 0 helpful votes

Please give me more information (serial number) about your car radio or take a look at my blog at this address :

Panasonic... | 88 views | 0 helpful votes

May I know your email add, I will send to you the copy on how to set-up your unit.

Panasonic... | 235 views | 2 helpful votes

Radio Decoding Service only for this code
It will not be available from anywhere on the Internet

Panasonic... | 50 views | 0 helpful votes


ID Code Setting

Prior to operating this unit, it is advisable to assign a 4-

digit ID code for security. Once the ID code has been set,

the unit cannot be operated if the main power supply is

disconnected then re-connected. It is electronically locked

so that a thief cannot use the stolen unit unless that person

knows the code you have set.

The ID code operation must be performed only by the

person to whom the unit belongs.

Generally, it is not necessary to enter the ID code each

time when using the unit if it has not been disconnected

from the main power supply (car battery).

to 4 digits numeric code

default: none

How to set your ID code (for the first time)

q Enter an 4 digit ID code.

w Enter the same 4 digit ID code again.

How to change your ID code

q Enter the preset (old) 4 digit ID code. If the wrong ID

code is entered, a new ID code cannot be registered.

w Enter a new 4 digit ID code.

e Enter the new 4 digit ID code again.

How to cancel the known ID code

q Enter the preset (old) 4 digit ID code. If the wrong ID

code is entered, it is not possible to cancel the ID code


w Touch and hold until "COMPLETED!" is displayed.

The ID code canceling procedure is completed.

The unit now works without an ID code.


¡Should your unit ever require service, cancel your ID

code before sending for repair.

¡The ID code setting cannot be eliminated even by the

memory clear function.

¡The inputted code is not displayed for your security.

0 9


¡Record your registered ID code and keep it in a

secure location. (Fill in the ID code memo (a

page 46).) If you forget it, you will be unable to use

the unit. In case you forget the ID code, please
consult your nearest Panasonic Service Center.

Panasonic... | 1,390 views | 1 helpful votes

Try to contact at " [email protected] " and send us details about serial and model radio.

Panasonic... | 99 views | 0 helpful votes

you can probably get a harness at

Panasonic... | 201 views | 0 helpful votes

With due respect to your language can you please post your problem in english so that it will be easy to understand your query and reply accordingly.
Thanks for contacting

Panasonic... | 494 views | 4 helpful votes


Basically iniorder to unlock the device hold down the right track button and press the little reset button with a paper clip, continue holding down the right track button until the device has reset.
Also let me know from where did you purchase the product or have you found it.

Panasonic... | 276 views | 1 helpful votes

there isw a wire that goes to the park brake switch from the stereo, disconnect this wire and you can use the dvd function when moving, but it is probably illegal to do so.

Panasonic... | 308 views | 0 helpful votes

i have heard that if you hold down the fast forward button for 7 seconds it will reset it

Panasonic... | 1,003 views | 11 helpful votes


Thanks for using FixYa. To cancel the stored ID code you’ll need to enter the preset (old) 4 digit ID code. If the wrong ID code is entered, it is not possible to cancel the ID code function. To reset the previously store IC code you’ll need to touch and hold until “Completed!” is displayed. The ID code canceling procedure is completed. The unit now works without an ID code.

Please do rate the solution and revert for further assistance.



Panasonic... | 1,085 views | 2 helpful votes

your lens is *******

Panasonic... | 68 views | 0 helpful votes

According to the manual, there is not "default" security code.
You will have to contact the MFR for support.

However chek this link for manual...

Hold the right track button to the right or 10 seconds and it works.
Thanks for contacting

Panasonic... | 316 views | 0 helpful votes


this link contains the service/repair/help manuals how to help you

thank you,
vijay(vote for me)

Panasonic... | 1,018 views | 1 helpful votes


Panasonic... | 75 views | 0 helpful votes

Had the same probem with my Avalanche. Electroncis store wanted $180 for harness. I ended up running new wires to the speakers and bypassed the amp. Stereo sounds awesome. Make sure you remove the stereo amp fuse.

Panasonic... | 134 views | 0 helpful votes

If the car had sound with the factory radio prior to the installation on this unit, then the problem is probably a factory amplifier. Some systems simply need the blue remote wire hooked up to turn on the amp, but others require adapters while others require the amp to be bypassed. Post the year, make, and model of your car, and I can try to help you determine what you need to do next..

Panasonic... | 207 views | 1 helpful votes

take off extra weight off your car key chain

Panasonic... | 42 views | 0 helpful votes

the green with yellow put it in ground

Panasonic... | 173 views | 0 helpful votes

Not finding what you are looking for?
Panasonic CQ-VD7003U Car DVD Player Logo

58 questions posted

Ask a Question

Usually answered in minutes!

Top Panasonic Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5023 Answers


Level 3 Expert

85239 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Are you a Panasonic Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Panasonic Car Audio & Video

  • Panasonic Car Audio & Video

Most Popular Question

need know set rca jacks hook amp

  • Car Audio & Video