Hi,
Please try clearing sequences by rotating the cycle dial counter-clockwise a bit before starting a new cycle. The reset should then allow your newly chosen cycle to work.
Thank you.
Hi,
the error relates to a motorspeed sensing error. I would advise you to get the washer serviced via maytag since there are multiple portions breaking down. You can call Maytag to get this done and learn about the actuators potential links to the machine's issues: 1 (800) 344-1274
Thank you.
You will have to call a person that repairs major appliances to have a look and see what the problem is. There could be something wrong with your washing machines controls for the door not to open at all. Or the door latch could be the problem and the motor.
Much better! Question edited for clarity, but not so much as the last one :>D
Check the switch operation with a multimeter. You are testing for continuity with door open and no continuity with door closed or vice versa depending on how they wired it.
Or you have a failed control board or a bad capacitor on it. The dim lights are the clue on that one.
One or more of the tub suspension rods or dampening straps could be damaged. Does the tub bounce smoothly, if you push it down and then release it? This checks the suspension rods. Other parts related to balancing the tub include the suspension pads, springs or balance rings. (The washer will usually squeal and shake badly, if the tub bearing is failing.)
The washer shuts off to avoid damage additional damage to the washer.
I hope this helps. Please add a comment with the model number of the washer, if you need a parts diagram to show where to look for these parts. The model number may be on the machine in one of these places: on the back behind the control panel, inside the lid on the bottom right corner, or on the back of the washer on the base frame on the left.
Cindy Wells
