Gemini DUMRC01 Remote Control - Answered Questions & Fixed issues
Lost instructionst ions
I am sure there is one to download but did not found anything with google...
If search engines are no help, just ask some deep web specialists, e.g.
http://manualfox.com - this is a manual search agency and if they don´t find it, it does not exist in the Internet. This is not free but most times worthy.
No picture just sound
on startup a television is subjected to severe inrush currents this sometimes results in a blown fuse in the psu stage most often at cold startup...this is the place to start...remove and test psu fuse...take precaution when working on tv as many high voltages exist sometimes even long after power is turned off...avoid the high voltagte thick red lead going into the tv tube or discharge if required the same applies to any high voltage reservoir capacitor/s in the psu stage
Need help with programing my Gemini easy 3 remote
I had the same problem, after searching the net for 2 hours to no avail, I got lucky and figured it out. Hold down the Ent and 0 keys at the same time for about 4 seconds. The green LED will come on. Enter the code of your TV or electronic and hit enter. then hit the power button on the remote. If the code was right the electronic will turn off.
I lost the codes for my gemini remote
hey, i have the codes but cant get my remote to work maybe you will have better luck, i have 4 codes they are
0906,0520,0324,0247,0004. mabybe you can write me and give me step by step instructions if it works for you,
good luck
Gemini pmx 3501 and xg2000
Here you go:
xg-2000: http://www.geminidj.com/disc._prod_manuals/AMPS/XG-2000/XG-2000.pdf
PMX-3501:
http://www.geminidj.com/disc._prod_manuals/MIXERS/PMX-3501/PMX-3501.pdf
Hope this is what you want
Digitrex DVD code
If you tryed the manual search and it did not find any, I'm afraid this remote is not compadable with this unit. What happens when you gop into a manual search is the remote will go to each code, one by one, until it(the remote) goes to the end of the list that is programmed into itself. There simply is not a code for this unit. Unless it is a learning remote, where you can pporgram into or teach the remote from the original, I am sorry to say you will need to get another remote that has the right codes programmed in it.
Gemini quick 20 need manual and codes
Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://homenol.blogspot.com/
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; to which you want set-up codes; in the "Search box at the top right of the display window" to get gathered related posts.
How to program Gemini remote
If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Search the site by type in the brand name of your device, in the "Search box at the top right of the Home page display" to see the set-up codes to your device, with different brand remote controls.
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code
Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may
be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
Not finding what you are looking for?