20 Most Recent Maytag MAH8700A Front Load Washer - Page 2 Questions & Answers

I am sorry the code is hp

Maytag MAH8700A... | Answered on Mar 11, 2014

This isn't good. it's normally related to the tub bearing or spider brace on the inner/ outer tub. Both parts tend to be very costly. If its under a year old you will be covered in warranty.. if not it maybe time for a new machine. I have seen this on washer's as little as 14 month old. I'm not a front load washer fan because of this problem.

Maytag MAH8700A... | Answered on Mar 08, 2014

If you're going to trash the machine, then you could use a large pry bar to force the door open from the hinge side - or a Framing hammer, with splayed flat forks. drive the prying instrument into the hinge side of the door with a hammer and pry away!
Hope this helps!

Maytag MAH8700A... | Answered on Dec 17, 2013

Possibly metal (paper clip or small coin causing earth leakage in water pump. Strip and clean, check all wires for shorting. Recheck plug fuse and motor (could be burnt out).

Maytag MAH8700A... | Answered on Dec 09, 2013

Do you hear the drain pump running? If so, you probably have something clogging the drain line. If you don't hear it running, the pump is probably dead. You can access the pump from the rear of the machine, and isn't that hard to do.

Maytag MAH8700A... | Answered on Nov 11, 2013

Technical Manual say "System Relay Failure"
Diagnostic Code 34

Maytag MAH8700A... | Answered on Sep 24, 2013

system relay failure. Sorry to say, but it means you have to replace the machine control board.

Maytag MAH8700A... | Answered on Sep 24, 2013

Sr is a stuck relay on your main board.Replace your pc board.

Maytag MAH8700A... | Answered on Sep 24, 2013

Hello & Welcome to FixYa

F2 is a drain error in your washer, if the unit is unable to drain then after 4 minutes it will display sud and then F2. The first thing that should be done is cleaning the drain hose and the drain pump filter, you can take out three torx screws from the bottom front panel and then clean the area completely, lift up the cap to clean the filter. If the error returns then check the drain pump if it is not working then replacing the pump is recommended repair. Please get back to me if you have any other questions.


Maytag MAH8700A... | Answered on Sep 11, 2013

The control board is faulty and will need to be replaced. Here is the part to order and it comes with a 365 day, any part, any reason return policy.

Maytag MAH8700A... | Answered on Jun 27, 2013

Not finding what you are looking for?
Maytag MAH8700A Front Load Washer Logo

359 questions posted

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Brad Brown

Level 3 Expert

18397 Answers


Level 3 Expert

746 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Maytag Washing Machines

  • Maytag Washing Machines

Most Popular Question

code sr mean maytag neptune

  • Washing Machines