20 Most Recent Canon NP 6230 Copier Questions & Answers

Hello friend, you can find the canon np6317 service manual in below link: Canon np6317 service manual: http://goo.gl/F1keAH thanks

scaner

Door sensor is on the upper right side of the machine

probably the drum unit needs to be replaced,but first I'd clean optic,mirrors, glass,developing unit ,fixing unit...

Easy.when you pull out the transport,open the fixing unit cover(one screw),than,on the left and right you hawe two more screws.Open it and take out web,and replace it with new one

I beliwe I allready answered that question too, a while ago,but anyway...You has to clean plattenglass,optical system and mirrors.How many copies did drum made? If more than 100000 you'll probably got to change it

You got to clean optic.Lenses,mirrors,platten glass...

Try first to clean optic mirrors and lens

Alt+3

1. Remove the glass
2. check the Lens Y home position sensor (clean it properly), or replace it
3. check the Lens Y Motor

if you change the sensor and the error code still, you need to change the Lens Y motor. this is the picture of the Lens Y Motor and Lens Home position Sensor (good luck)

I TRY TO UNPLUG POWER CABLE AND PLUG IT AGAIN . THE ERROR DISAPPEARED

Sorry, No. This is an anolog copier and doesn't have any way to hook up to a computer.

vaya y baje el manual de instrucciones para ver errores:www.servicemanuals.net o www.angefirecom or www.schematicx.com or www.2manuals.com or www.copierrepair.net or www. retrevo.com or www. eserviceinfo.com Dios le bendiga

Did you "aired" the sheets, in a motion similar to shuffling cards? That's what I do when loading paper, since the packaging compresses the sheets making them stick together due to vacuum...

A E210 has to do with the scanning lamp. It could be that the scanning lamp is blown or the thermal fuse is blown or most likely is that the black power cable is cracked and the power going to the lamp is shorting out to the fram of the copier. The rubber coating cracks from the use of the scanner going back and forth. It is not a easy repair. Good Luck