20 Most Recent
Canon imageRUNNER 5570 Copier - Page 3 Questions & Answers
Error e202 in canon 6330
E202 That is scan problem scan switch scan motor or may bi image processor board.do not forget to rate solution.by MIAN JEE
5/19/2014 10:38:29 AM •
Canon...
•
Answered
on May 19, 2014
QUESTION ONE
try ti clear this error from the service mode first
4/17/2014 9:27:23 PM •
Canon...
•
Answered
on Apr 17, 2014
Canon 6570 E000025-0001
First check for a toner bottle that isnt installed right. FOR SURE.
If ok then One of the toner motors has failed. Motor 9 and 10 should be replaced. BOTH motors. If error goes away you got lucky! Usually when one of the motors goes it take out fuse 15 on the dc controller. Also if you replace dc controller with out replaceing the burnt motor, the bad motor will blow the fuse again on the dc cont. So its best just to replace both motors.
M9 is the usual suspect.
3/16/2014 2:41:10 PM •
Canon...
•
Answered
on Mar 16, 2014
Error code E 000025-0001
hello i m ramy,first replace the toner bottle, second check the hopper motor connection,
hopper motor unit gears.
or test if there 24 vdc .to the motor
3/16/2014 2:28:03 PM •
Canon...
•
Answered
on Mar 16, 2014
Not finding what you are looking for?