20 Most Recent Canon EOS 30D Body Only Digital Camera - Page 9 Questions & Answers

Check to see if the battery had a charge.

use a card reader to retrieve the video The camera uses a standard SD card

Have you looked in the manual ?

It sound like a fault with the auto connection probably a broken or cracked ribbon cable. May well need a replacement

If it focuses OK manually but doesn't on auto you may have a crack or broken ribbon cable in the lens.

Check that the sandisk ultra microsdhd 1 is compatible with the Legria FS306

Try here https://www.manualslib.com/manual/24501/Canon-Powershot-Sx210-Is.html

Does live view work with other lenses? if so you may just have a dirty or faulty connection re the Tamron 70-200.

You need to check out the correct settings as the flash sync speed for you 6D ii is 1/180th which you should be able to use at 1/200th so only being able to get less than 1/160th would indicate incorrect setting in the external flash mode or a slight fault.

Thanks for letting us know

Check protection switch on memory card door, if switch defective, camera wont turn on

Make sure that the flash on the unit is working and that you aren't accidentally covering the flash on the camera with your fingers. Make sure there is good lighting for your pictures.

Hmmm... if the viewfinder exposure bar is also out of focus, I think the problem might be the manual focus for the viewfinder itself. Usually cameras have little thumbscrew somewhere near the viewfinder. It's there to accommodate differences in some peoples vision (do they have their glasses on or not ?). Yup... that's my bet. Give it a go. Is it on the top, right of the viewfinder? /The GreyOne

this may help https://photography-on-the.net/forum/showthread.php?t=966194

Check compatibility with Sigma representative in you area.

Why not look in the manual ? The answer to this, and many other queries, can be found therein.

I'm not familiar with this particular model, but usually it refers to preventing recorded images being accidentally deleted. AFAIK, it will be able to be turned on and off.

Follow the instructions in the manual.

If the manual say yes, then they can - otherwise probably not.