20 Most Recent Emerson EM-CKT9087 Corded Phone Questions & Answers

you can contact the service provider......

Emerson... | Answered on Sep 25, 2011

Power surges cause alot of internal damge. It would be cost effective to replace this unit. It is nolonger available. But you can probably find a comparable one at your local Wal-mart or office supply store.

Phones on the net:

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Emerson... | Answered on Nov 18, 2010

It means to set the time in 24 hr. format

Emerson... | Answered on Dec 11, 2009

i would say if you have a cell call the phone company

Emerson... | Answered on Jun 06, 2009

On the phone go into the menu and select date and time. Set the date in american format so MM/DD, ie. 9th of may would be 05/09.

Emerson... | Answered on May 09, 2009

Emerson... | Answered on Mar 24, 2009

This is due to the base unit losing power and needs the clock resetting.
The handsets retain their clocks under battery power so this is a little misleading.

To reset the base unit clock:
- press the OK key
- press the 'down' arrow twice until "DATE/TIME" is displayed.
- press the OK key again, this will display the year. Enter the correct year on the handset numeric keypad and then press OK. (Only the last two digits of the year need to be entered).
- The date is then displayed in MM/YY format, enter the correct date on the handset numeric keypad and then press OK.
- The time is then displayed, enter rhe correct time on the handset numeric keypad and press OK.
- The handset then beeps and displays "SAVED".
- Press the "C" button and replace the handset on the base unit.

The base unit should now stop flashing "CL".

Emerson... | Answered on Jan 21, 2009

I have the same problem with my unit. Emerson customer service made some suggestions, including pulling the 9V battery, disconnecting the phone from phone and power for 3 hours, etc. Their first suggestion (earlier this morning) was to Push "Up" button and hold for 4 seconds, then pressing the "delete" button three times and re-pressing the "Up" button for 6 seconds. That procedure failed. I'm in the midst of the 3 hour wait after full disconnect of phone line and 120V plug. I don't think my phone will come back. I'll be happy if it does. Good luck with yours...Richard

Emerson... | Answered on Dec 09, 2007

there are a very small capacitor in the board that produce low battery mesege when it get damage, but you gona need a tech to repair your phone there are another problem in your phone its not a seting problem...good luck

Emerson... | Answered on Aug 06, 2006

It depends on your service provider. Try calling your own phone number from the em7000.

Emerson Lands... | Answered on Jan 04, 2019

Press and hold the zero! I have googled this so many times and always have to download the manual for something that needs a 5 word sentence. I hope this helps someone else.

Emerson Lands... | Answered on Dec 27, 2018

Google (emerson)(md 6120-2)(manual) without parens for instructions.

Emerson Lands... | Answered on Nov 17, 2018

Not finding what you are looking for?
Emerson EM-CKT9087 Corded Phone Logo

24 questions posted

Ask a Question

Usually answered in minutes!

Top Emerson Lands Phones Experts

Cindy Wells

Level 3 Expert

6099 Answers


Level 2 Expert

42 Answers

The Knight
The Knight

Level 3 Expert

76352 Answers

Are you an Emerson Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Emerson Lands Phones

  • Emerson Lands Phones

Most Popular Question

wharfedale in120 cl flashing

  • Lands Phones