Top 20 Canon imageRUNNER 2016 All-In-One Laser Printer Questions & Answers


E010-0000 Main motor failure
The main motor is faulty. - Check the connector of the main motor.
- Replace the main motor.
- Replace the DC controller PCB. http://mfpdoc.com/?mod=free&chap=erc&brand=Canon&model=iR2016

Canon... | 234 views | 0 helpful votes


just clear All. you can try.
press button Additional function - 2 - 8 - additional function - (#SSW on display) press button arrow to search Clear - Ok - press button arrow to search All - press ok. wait until ready (about 5 minute)

Canon... | 573 views | 0 helpful votes


Nothing displays on screen on IR 2016 . Dear. you may check the flat cable connected with the display unit which becomes faulty . change the flat cable then it will show everything on screen.

Canon... | 81 views | 0 helpful votes


Dear, check all the ccd flat cables of scanner unit and dc boards back side and replace them which are faulty due to long time which lost the metallic strength for which this issue comes .One flat cable is fitted from scanner lamp unit to its board which is long cable and two flat cables are fitted with this scanner board to back side pcb which are long and another one is connected to two pcb boards at back side one comes from mother board to other board,

Canon... | 348 views | 0 helpful votes


Dear User,
press additional setting in canon ir 2016 photocopier.then choose language setting tab now select the language by pressing + or - button then save it. it may work.

Canon... | 177 views | 0 helpful votes


REPLACE THE FIXING FILM

Canon... | 64 views | 0 helpful votes


Dear. first change the drum cleaning blade and clean the waste toner from the drum unit safely and then try to copy if the black lines still appears then change the drum then it must solve the issue , If still the problem comes then check the laser unit if there is anything which produce the black lines on the pages.

Canon... | 394 views | 1 helpful votes


E019 usually means the waste toner is full. The waste toner is, I believe, in the drum, so you'll need a new drum. The drum appears to be under the front cover. You might want to call your service rep. if you are not comfortable doing this yourself.

Canon... | 242 views | 2 helpful votes


Ir 2016, can be onlly pull scanner, so that means that you must have installed scan gear, selected in scan gear, and over microsoft word or similar insert scan ( INSERT PICTURE FROM SCANNER OR CAMERA ), but the machine must be in scan mode, put original on platen or dadf, and then "pull it"from PC.

Hope that helped


pls.rate

Canon... | 1,594 views | 0 helpful votes


to solve this problem, loading the system software to do this, you need the tool called Canon SUPORT SERVICE TOOL

Canon... | 50 views | 0 helpful votes


hey, wel if the copier is showing a message saying that the waste toner is full it means the waste toner deposit is attached to the drum unit.

so, open up the frotn cover, pull down the (drum)-lock lever, it should release the left cover, then pull towards you the drum unit, and there you go.
the black case with a small trasparent cap is the waste toner deposit.

you have two ways to go.

1 you may remove that rounded transparent plastic cap and be able to vaccum the waste toner (dont even try reusing that toner, it wont work ok) or

2 you can go the other way wich allows you to easily vaccum it: remove the drum (the roller itself) then the charger roller, then the cleaning blade and there yo go again, but now you got more space to vaccum and believe me it is easier this way.

an additional choice would be to buy a new drum unit gpr18 i think (check please) and forget all about vaccum-ing.

Canon... | 916 views | 2 helpful votes


wich parts do you need? you can write on [email protected]

Canon... | 131 views | 0 helpful votes


Unplug the printer so that the cartridges will remain in their position. 2 Locate the waste ink absorbers in their black rubber frame. They will likely be on the right side of your printer, and will be located underneath the area where the ink cartridges rest when the printer is in standby mode

Canon Office... | 155 views | 1 helpful votes


What OS do you have? Please add the update version for Windows 10. The drivers are still available from Canon here: https://www.usa.canon.com/internet/portal/us/home/support/details/printers/support-inkjet-printer/i-series/i9900?tab=drivers_downloads for supported OS versions. It looks like the printer used Windows Update for to install most of the drivers under Windows 7. There is an optional update for the driver on the site but it doesn't work unless Windows Update installed the basic driver. The Canon didn't officially support the printer for any OS after Windows 7.

The Windows 7 driver worked under 8 (8.1) and some versions of Windows 10 for a while. (Under Windows 8, the ZoomBrowser software didn't work.) Then Microsoft became strict about not allowing unsigned drivers to install. The easiest solution is to find an old Windows 7 computer to connect to the printer. Alternatively, get an unused install license and build a virtual machine to connect to the printer. Note: recent cumulative updates for Windows 10 have caused issues with USB printers.

If you are using Windows 8 or 8.1, try connecting the printer via the USB port with the machine off. The restart the computer; make sure that the Windows Update is set to find updates for other devices (not just Windows). If you are using the printer over a network, some found using the Canon ProMark 9000 series drivers worked.

I hope these ideas help. I wish that I had better news for you about Canon support.

Cindy Wells
(Building a virtual machine OS depends on your CPU allowing virtualization and free memory. You also need the Windows Pro or Enterprise versions of the OS for Hyper-V (Windows 10) or the Windows 8 VM equivalent. Third-party tools for creating a virtual machine may work on the home edition.)

Canon Office... | 54 views | 1 helpful votes


Fix the Canon printer error b504: Canon Printer Online Chat Support
  1. At first, turn off the printer and then unplug the power cables.
  2. Secondly, open up the cover of the printer and move the print cart manually.
  3. If you find any difficulties, try to plug back the cables that you need to power on the printer.
https://www.dialprintersupport.com/blog/how-to-troubleshoot-the-canon-printer-error-b504/

Canon Office... | 225 views | 0 helpful votes


The E5 error indicates the wrong cartridge or a cartridge that has been installed incorrectly.

Canon Office... | 17 views | 0 helpful votes

Not finding what you are looking for?
Canon imageRUNNER 2016 All-In-One Laser Printer Logo

Popular Tags

22 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2301 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Canon Office Equipment & Supplies

  • Canon Office Equipment & Supplies

Most Popular Question

canon 2016 vertical black lines print

  • Office Equipment & Supplies
Loading...