20 Most Recent Canon imageRUNNER 2016 All-In-One Laser Printer - Page 2 Questions & Answers

  1. Take a bowl with warm water and add some soapy material.
  2. Open the ink cartridge compartment.
  3. wait for ink cartridges and disconnect the printers power cord.
  4. Look balck rubber frame under the ink cartridge.
  5. pull the rubber frame out of the printer and remove ink absorber pads.
  6. clean the pads in the bowl.

Canon Office... | Answered on Sep 04, 2020

The Canon Printer Error Code 1401 occurs when the printer machine is not able to recognize one or all the cartridges installed in the machine. These errors show up in the form of messages such as "Fine cartridge isn't installed" for 1401 or fine cartridge isn't installed in a proper manner for 1687 message.Jan 7, 2019
www.printerstechnicalsupport.com > how-to-fix-canon-printer-error-cod...

How to Fix Canon Printer Error Code 1401 ' Printer Technical ...

Canon Office... | Answered on Sep 01, 2020

If the message is "Ink Absorber Full", then the problem is hardware. For most ink jet printers, this means that the unit has reached it's end of life based on the number of print head cleaning cycles/pages printed. If your printer is under warranty (1 year), contact Canon.

To resolve the problem, you would need to disassemble the printer (carefully). Keep plenty of paper towels handy; the job will be messy. The ink pads are usually below where the ink cartridges go during a cleaning cycle. When you reach the rubber pads that hold the waste ink, rinse them until the water runs clear. Dry the pads well. Wipe any remaining ink out of the compartments where the pads were. Reassemble the printer. Now, you can try one of the online reset procedures. I have no idea which ones will work with your Pixma MG3200.

If you do not clean the ink absorbers first, then you will likely get excess ink on your documents and photos. Then additional ink may drip out of the printer.

I hope this helps.

Cindy Wells

Canon Office... | Answered on Aug 31, 2020

TO ANYONE READING THIS...I nearly took a hammer and smashed my Canon LIDE 110 Scanner cause I was so mad that it gave me this stupid error (5,202,52) no matter where I was connecting it and I thought it was done...

THEN I just took another USB Cable (Like I have around 10 different USB Cables) ...AND IT WORKED! Try several USB cables before you give up on it...also don't start messing around with drivers and stuff, you could end up screwing up your system like I did...

I hope this helps someone out there in the future with error 5,202,52 or 5,202,54, etc.

Try at least 4-5 different USB cables before anything else..

(If you want to know, I successfully used the USB cable with one of the fat black circle things on it (I think its for power or something), not just a straight usb cable. It's still a 5 pin USB cable however (Regular USB on one side, small 5 pin connecter on the other side))

Canon Office... | Answered on Aug 30, 2020

Is it a Canon, or is it a Rank Xerox? It can't be both!

It sounds like you have a power issue. Check the the power cord is firmly entered into the machine. Also try the power plug in another outlet as sometimes the clips inside can go slack. After that, it a matter of checking the power switch on the machine itself and and connections to the main circuit board. For that, you call out a technician.



Canon Office... | Answered on Aug 25, 2020

Canon Printer Error 5011 is kind of printer error usually occurs because of some problem in the cartridge holder that is stuck inside. This printer problem does not allow users to perform the scanning process.

Methods that fix Canon Printer Error 5011 Easily:-

Method 1: Perform Power Cycle.

Method 2: Check if Any Bits of Paper is Stuck in the Machine.

Method 3: Clean the Encoder Strip.

Method 4: Try Turning Off and Then Turning on the Printer.

blog - Canon Printer Error 5011


Canon Office... | Answered on Aug 25, 2020


you better go to printer and faxes,right click on canon printer and select USE PRINTER ONLINE AND

once again right click open the printer and cancel the prints jobs which was already in queue.

then put Refresh button and get the printout smoothly.

Canon Office... | Answered on Aug 24, 2020

It is a known issue.

Try cleaning the pick up rollers with soapy water. Also make sure the setting for card stock is not active.


Canon Office... | Answered on Aug 17, 2020

Most likely the safety fuse in the device might had gone. Before that check the mains chord which generally give way at their junction with the plug or socket.

Canon Office... | Answered on Aug 16, 2020

Check the color cartridge. May be a little bit of cleaning at the colour dispensing slit.

Canon Office... | Answered on Aug 15, 2020

The E5 error indicates the wrong cartridge or a cartridge that has been installed incorrectly.

Canon Office... | Answered on Aug 13, 2020


Solved: Code 5,157,69 - Canon Community

community.usa.canon.com > Code-5-157-69 > td-p
Mar 16, 2015 - 10 posts
Solved: I have a PIXMA MG5520 printer. The printer works, the copier works, but when I try to scan, I get a Code 5157,69. I have uninstalled ... Error code 5 157 69 - Canon Community
10 posts
May 16, 2015
Code 5,157,69 - Page 3 - Canon Community
10 posts
Oct. 31, 2016
I receive an error code:5157,69 when I try to sca ...
10 posts
Jun. 29, 2014
Code 5,157,69 - Page 2 - Canon Community
10 posts
Sep. 10, 2015
More results from community.usa.canon.com

Solved: I receive an error code:5,157,69 when I try to sca ...

community.usa.canon.com > Office-Printers > td-p > page
Feb 1, 2017 - 7 posts
I have 2 canon printers that have scanning capabilities. When I scan on one of the printers I am unable to connects to the other printer if I want to ...

Canon Office... | Answered on Aug 09, 2020

There are various reasons liable for this error. If you want to exclude this error then you need to know the causes of Canon Support Code 1660. Some of the common reasons for this error are mentioned here:

1.Incorrect fitting of the ink cartridges.

2. Misplacement of the ink cartridges.

3. Broken or clogged ink cartridges.

4. If the print machine is not available to recognize the ink tank then you may face Canon Support Code 1660

Solutions that Rersolves Canon Support Code 1660 Easily:-

Solution 1. Reinsert the Ink Cartridge - This is a very simple answer to solve your difficulty. By reinstalling the ink cartridge you can succeed this error.

Solution 2. Cleaned and reset the paint cartridges - If the above solution fails to remove this error then clean and reset the ink cartridges to fix this problem.

BLOG for Support- Canon Support Code 1660


Canon Office... | Answered on Aug 07, 2020

Try this . Make some copies ( at least 5) and open one of the covers while machine is making copies. Remove the paper jam and verify if the copy is blurred. Do this to be sure of what unit is causing the blurred copies. If copy information is good before the paper enter in the fixing unit . That mean the problem is is the fixing unit

Canon Office... | Answered on Aug 05, 2020

Not finding what you are looking for?
Canon imageRUNNER 2016 All-In-One Laser Printer Logo

Popular Tags

22 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2310 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Canon Office Equipment & Supplies

  • Canon Office Equipment & Supplies

Most Popular Question

canon 2016 vertical black lines print

  • Office Equipment & Supplies