Top 20 Canon PIXMA MP830 All-In-One InkJet Printer Questions & Answers

Hi . That problem is the print head. Is defective. Buy a continuous ink system printer. Is more efficient

Canon PIXMA... | 93 views | 0 helpful votes

Did it finish maintenance before you reboot?

Canon PIXMA... | 230 views | 0 helpful votes

Either a power supply fault or there is a fault in the main circuit board. You may find a replacement power unit (they are held in by two clips ) at an electronics recycler or auction site like e-bay, but the main board is not an available part.

Canon PIXMA... | 108 views | 0 helpful votes

hi Jackelle21.
i have had a look around the internet and all i can find out from going into forums is that the problem might be because you need to download what they are calling (mp navigator)
so not sure if this is what you have to do.but if you go to this link you will see download sites to where you can get it.

mp navigator download Google Search
or this one.
Canon MP Navigator EX

Canon PIXMA... | 108 views | 0 helpful votes

The most common cause of this is a failure in one of four earth circuit in the print head. It is not repairable

Canon PIXMA... | 91 views | 0 helpful votes

hi deborah.
see if this link helps you find out why it will not turn on.
Mp 380 printer will not turn on Google Search

Canon PIXMA... | 58 views | 0 helpful votes

Did you let the camera format the sd card before you took your pictures? Have you tried another sd card? Its possible the pc did not close the card properly so the printer does not see it. I would try another card before going any further. Make sure your setting on the printer is set to read only (in "Other" settings) if at read/write you will not be able to print.

Canon PIXMA... | 203 views | 0 helpful votes

Look through your fax machine instructions,. There should be some there regarding how many rings before pickup. Or maybe the unit does not have that feature and is designed to have its own separate line for faxes.

Canon PIXMA... | 60 views | 0 helpful votes

Uninstall the printer driver completely, then reinstall the driver again.

Canon PIXMA... | 107 views | 0 helpful votes

You can sometimes buy cleaning cartridges that contain fluid designed to clean nozzles. See if they exist for your model.

Canon PIXMA... | 281 views | 0 helpful votes

Check for the switch is it not jermed or check the switch contact is it not normally opened or normally closed for the full time.

Canon PIXMA... | 296 views | 0 helpful votes

Hi. Have you try sending fax to other number maybe the problem is the receiver in the other side of the line .

Canon PIXMA... | 63 views | 0 helpful votes

With the machine powered on, open the top cover (including the scanner unit). The cartridge carriage and printhead will move to the center. locate the cartridge needing to be replaced (flashing light or light off) push the clip at the front top corner forward and the cartridge will pop up slightly. Remove and replace. To replace a cartridge remove any nozzle clips and the airway seal tape. Slide the new cartridge into the appropriate slot angling slightly down the in. press down until it clicks in place. If it feels difficult , try again - don't force it. When done, close the cover down and your machine should do a self clean and go.

Canon PIXMA... | 59 views | 0 helpful votes

Try unplugging from your computer, uninstall printer on your computer and reinstall.

Add or remove printer

Canon PIXMA... | 81 views | 1 helpful votes

The print head needs cleaning. You can watch a you tube video on how to do it.

Canon PIXMA... | 60 views | 0 helpful votes

scanners/ printers costs are as low as $35.00 for a new one and if it is a wifi unit may be $100.00 to replace new
with labor costs and parts ( if you can get them) I would consider junking it and get an updated new one

Canon PIXMA... | 67 views | 1 helpful votes

The 5010 error indicates a scanner error. The scanner unit cannot detect the home position, or the scanner unit warming-up is not done properly at power-on. On the LCD, "Scanner is not operating correctly." is displayed.
The 6100 error indicates a logic board error. The check sum value is incorrect in the ROM check at hard-power-on.
Fixing these errors is more expensive than replacing the printer. Sorry.
Fixing F

Canon PIXMA... | 245 views | 0 helpful votes

If you have tried cleaning the nozzles as Oliver suggested. Try setting your paper type to 'high resolution' and try printing. If this works, your circuit board is probably the problem and you need to replace the printer after using up your inks in the 'high resolution paper' print mode

Canon PIXMA... | 310 views | 1 helpful votes

Not finding what you are looking for?
Canon PIXMA MP830 All-In-One InkJet Printer Logo

1,992 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2311 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular


  • PIXMA Canon

Most Popular Question

get canon pixma mp830 printer print

  • Office Equipment & Supplies