20 Most Recent
Intel PRO/Wireless 2200BG 802.11g/b - Page 9 Questions & Answers
My intel inside nextbook aries 8 will cut onsays my device has failed verification and may not work properly and says it will boot in 5 seconds but all it does is stay on the flashing nextbook symbol.
The most common possible reason is hardware failure. Shotdown your device. Disconnect the hard disk and ram. If you can reset the CMOS by disconnecting CMOS battery, its better. Disconnect device battery and make sure it was unplugged from AC power source. Now press the power button within at least 15 to 20 seconds to drain. Insert back the ram ( if you have spare ram tested working its better ). Plugged the device to AC power source. Power on the device and simultaneously press the F2 to enter the bios. Some keys to enter BIOS is DELETE or ESC. If you can enter the BIOS select Load Default Settings. Save and exit. Unplugged the power source and attached the hard drive. Again plugged to power source and power on the device. Repeat entering the BIOS and check your Hard Drive from main tab or if it was listed on Boot priority. If you found there just exit and restart the machine. It should boot on its operating system or display message error startup listing many options like safe mode, boot normally, last common good configuration and others. Choose start normally if you're unsure. It should boot on windows successfully
I have a motherboard coxcomb
if theres is a dedicated graphics cards in the board, your problems was associated in graphics issue. if there is no Vcards in boards your builtin vcards had gone bad already try to place a didicated vcard
Sound driver isnt working
hi there...try to download all driver mainboard at internet to make all system work...please write the brand,type/series of mainboard.(ex: ASUS P5KPL) and operating system that you use (XP or Vista)
go to search engine (ex:google) type it and search ... you will find the drver that you need for your mainboard..good luck..
I WANT UPDATE MY BIOS.
Bios updates should only be done when absolutely necessary because, often, they run in problems and you then have no computer since your bios is now messed up. If you still want to do it get the upgrade bios from the mo bo manufacturer and use software that will also backup what you have in case of disaster. A word to the wise.
IMac 12 used to reboot unexpectedly, now just shuts down unexpectedly. Intel Core i5, 2.7 GHz. Is this a capacitor problem? Apple store has been unable to fix.
it could be a processor problem or a thermal sensor problem is the vents clean on the processor is the fan turning fast, does the fan sound like its on turbo. the pc will shut down if something is getting to hot, there are thermal sensors dotted around the board. these show the temp of each area. even the processor has them inside if you had some software that can read these sensors you will be able to find out what sensor is getting to hot. iven the hard drive or sd drive has these fitted. looks foe some software like system temp , i know they do software for windows but i don't know if its the same for macs but i would of thought they would have a similar software
How to fix d3d9 dll error
Hello mc_allain200
First Download this one.
http://www.dlldump.com/download-dll-files_new.php/dllfiles/D/d3d9.dll/5.03.2600.2180/download.html
Then once its done downloading put it in: C:\windows\system32\
And then go to RUN and type:
regsvr32 C:\Windows\System32\d3d9.dll
Just change Drive if C: is not your Primary Drive.
Hope that helps.
Not finding what you are looking for?